AEMC Graphical Megohmmeter, 5000V
This AEMC graphical megohmmeter has an RS-232 port which provides the ability to configure the unit and run the test from a PC
Item #: 166756
Manufacturer: AEMC Instruments
Manufacturer Item #: 5070
Your Price $4,992.95
Features & Applications:
The AEMC graphical megohmmeter is a fully automated 5000V graphical insulation tester. Selectable and programmable test voltage (40 to 5100V). Programmable temperature correction of resistance readings. The Model 5070 is the only megohmmeter to offer both a graphical plot of the test right on the instruments, as well as a digital presentation of the test results. It has a large graphic display with five line alphanumeric display and graph. It also offers the ability to program up to three step voltage profiles, each containing up to five steps. The Model 5070 has an RS-232 port which provides the ability to configure the unit and run the test from a PC. Test results can be generated directly to a printer using the DataView® graphing and analysis software.
Features:
- True Megohmmeter® with selectable test voltage from 40 to 5100V, and fixed test voltages of 500V, 1000V, 2500V and 5000V
- Insulation measurements from 30kΩ to 10TΩ
- Automatic step voltage with programmable step and dwell times - three profiles can be stored, each with up to five steps
- Programmable temperature compensation of resistance readings
- Automatic calculation of DAR, PI and DD values
- Direct measurement and display of Resistance, Test Voltage, Run Time, Capacitance and Leakage Current
- Automatic test inhibition if live voltage is present
- Automatic discharge and display of discharge voltage
- Large graphic display with five line alphanumeric display and graph of all test results
- Rugged weatherproof field case
- RS-232 interface for direct printing of results
- 128kB memory for storing field test data
- Remote operation from PC
- Includes DataView® software
Applications:
- Test insulation on cables, transformers, motors, generators, insulators and wiring installations
- High resistance or absorption tests
- Spot reading tests
- Timed resistance measurements
- Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
- Multi-layer insulation testing (DD)
- Test old or water damaged installations over long time runs
- Motor insulation resistance measurements
- Computer controlled production line testing
- Predictive maintenance by storing results in PC for trend analysis
- User selectable voltage testing to provide application specific testing
Specifications:
| Output Test Volts (DC): | 500/1000/2500/5000 | Insulation Resistance Range (Ohms): | 30k to 10T | Safety Check Volts Range: | 0 to 1000VAC/DC | Capacitance Range: | 0.005 to 49.99 uF | Display: | Graphical LCD | Auto Power Off: | Yes | Safety Rating: | CAT III 1000V | Leakage Current Range: | 0.00nA to 3mA | Auto Ranging: | Yes | Features: | Selectable and Programmable Test Voltage (40 to 5100V) - Three Can Be Stored, Automatic Step Voltage, Programmable Temperature Compensation, Large Graphic Display With Five Line Alphanumeric Display and Graph Of Test Results | Power Source: | Rechargeable NiMH batteries | Includes: | Accessory Bag, 1 Red, 1 Blue Test Lead, 1 Black Test Probe with Integral Hippo Clips, One Lead for Use with Guard Terminal, Interface Cable, Rechargeable Battery Pack, Software, Power Cord, Instructions |

















