Features & Applications:
Industry proven performance combined with a low-profile design make the Industrial Scientific AirAware™ a logical choice for those critical areas that require continuous monitoring but not the environmental protection of an explosion-proof enclosure. Providing discrete monitoring and enhanced aesthetics for more commercial or institutional settings, the AirAware Series is the ideal solution for reliable, low-cost, fixed-point monitoring.
The AirAware can be configured to operate as a monitor with local LED display, a controller with onboard relay switching capability, a transmitter with 4-20mA or Modbus RTU outputs, or as a transmitter with on-board relays. Each configuration is designed to meet your specific indoor monitoring needs. CSA and CE approved, every AirAware is equipped with electrochemical sensing technology, dual alarm LEDs, a digital display providing real-time readings, push-button operation and a NEMA 4 type enclosure. When alarm conditions are met, low/high alarm visual indicators alert users to gas hazards.
Standard operating power is 12-24 VDC for the AirAware, while a 120 VAC power supply is included for convenient plug-in monitoring applications. Has onboard audible alarm for maximum attention and a vanity plate to hide the display. The AirAware is covered by a one-year warranty.
Features:
- Gas type monitored: Carbon Monoxide (CO)
- Bright digital display constantly shows gas concentrations
- Single button calibration, alarm muting and zero
functions
- Visual alarm to alert of potential gas hazards
- On-board audio alarm
- 4-20 mA output & relays
- AC Power Adapter
- Vanity Plate
- Compact size
- CSA Approved
- One year warranty
Spec Summary:
Case: |
NEMA 4 type, General purpose indoor use. Electroplated
for RFI protection. |
Dimensions: |
7.2" x 5.6" x 1.6" (18.29 cm x 14.22 cm x 4.06 cm) |
Weight: |
16 oz (454 g) |
Sensor Type: |
Electrochemical |
Measuring Ranges: |
Carbon Monoxide (CO) − 0 to 999 ppm |
Power Source (Run Time): |
12-24 VDC (110 AC adapter optional with North American plug) |
Temperature Ranges: |
-4°F to 122°F (-20°C to 50°C) typical, consult factory for gas
specific temperature ranges |
Humidity Range: |
15 to 90% |
Approvals: |
CSA − C.22.2 No. 205-M 1983 (non-hazardous locations);
CE (pending) |
Warranty: |
One year, including sensor |
Note: Industrial Scientific products can only be sold in North America only.
