Item #: Q506-6056
Manufacturer: Zircon
Manufacturer Item #: 60056
Product Type: Stud Sensor
List Price: $43.95
Discount: $10.95
Final Price: $33.00
Zircon Triscanner Onestep is a four-function scanner with the patented SpotLite Pointing System!
This is a clearance item. Limited quantities available. Prices good while supplies last. No backorders accepted. Clearance prices not valid with any other discount. All Sales are final.
Features & Applications:
TriScanner® OneStep™ finds the center and edges of studs and joists, finds metal pipes up to 11⁄2 inches (38 mm) deep, and finds rebar (ferrous metal) in concrete up to 3 inches (76 mm) deep, while continuously detecting hot unshielded AC wires. Now users can always find the best place for hanging or installing things without any interpolation.
Features:
- CenterVision takes all the guesswork out of locating the best place to anchor into a stud
- Finds both wood and metal studs
- Constant hot AC WireWarning™ in all modes for safety
- Patented SpotLite® Pointing System
- Patented DeepScan® dual sensitivity scanning
- Metal scan for finding pipes, nails, rebar, and other hidden metals
Applications:
- Exclusive-finds the stud center
- Finds both wood and metal studs
- Constant hot AC WireWarning™ in all modes for safety
- Patented SpotLite® Pointing System
- Patented DeepScan® dual sensitivity scanning
- Metal scan for finding pipes, nails, rebar, and other hidden metals
Applications:
- Find the center and edges of wood or metal studs or joists to:
– Hang cabinets, pictures, mirrors, and shelves securely
– Install ceiling fans, grab bars, and chandeliers - Find metal pipes behind tile and in concrete
- Find conduit, rebar, electrical boxes, exhaust vents, and ducts
- Detect hot electrical wiring behind walls, floors, and ceilings
- Avoid cutting or drilling into piping or electrical lines
Spec Summary:
| Dimensions: | 6.32 in. H x 3.13 in. W x 1.27 in. D (161 mm x 80 mm x 32 mm) |
| Weight: | 6.5 oz. (184 g) without battery |
| Battery type: | 9-V alkaline (not included) |
| Position accuracy: | Stud Scan mode: typically within 1/8 in. (3 mm) using the
dual scan and mark procedure DeepScan mode: typically within 3/16 in. (5 mm) using the same procedure Metal Scan mode: typically within 1/2 in. (13 mm) |
| Depth: | Up to 3/4 in. (19 mm) in Stud Scan mode Up to 1-1/2 in. (38 mm) in DeepScan mode Up to 1-1/2 in. (38 mm) for copper in Metal Scan mode Up to 3 in. (76 mm) for rebar in Metal Scan mode NOTE: Sensing depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc. |
| AC Position accuracy: | Typically 90–250 V at 50–60 Hz laterally within 12 in. (150 mm) of a hot unshielded wire |
| AC Depth: | Typical depth of 2 in. (50 mm) |
| Operating temperature: | 20 to 120°F (-7 to 49°C) |
| Storage temperature: | -20 to 150°F (-29 to 66°C) |
| Humidity: | 80% RH (noncondensing) |
| Water resistance: | Splash and water resistant, not waterproof |