Item #: Q506-6040
Manufacturer: Zircon
Manufacturer Item #: 60040
Product Type: Stud Sensor
Your Price: $51.95
In Stock
Zircon Multiscanner Onestep with Centervision is a five-function scanner with the patented SpotLite Pointing System!
Features & Applications:MultiScanner® OneStep™ finds the center and edges of studs and joists, finds copper pipes (and other nonferrous metal) up to 1-1/2 inches (38 mm) deep, finds rebar (ferrous metal) in concrete up to 3 inches (76 mm) deep, and detects and traces hot AC wires. Now users can always find the best place for hanging or installing things without any interpolation.
Features:
- CenterVision takes all the guesswork out of locating the best place to anchor into a stud
- Exclusive-finds the stud center
- Finds both wood and metal studs
- AC scanning to trace hot wires
- Metal scanning for finding pipes, nails, rebar, and other hidden metal
- Large easy-to-see back-lit LCD screen
- Patented SpotLite® Pointing System
- Patented DeepScan® dual sensitivity scanning
- Constant hot AC WireWarning™ in all modes for safety
Applications:
- Find the center and edges of wood or metal studs or joists to:
– Hang cabinets, pictures, mirrors, and shelves securely
– Install ceiling fans, grab bars, and chandeliers - Find metal pipes behind tile and in concrete
- Find conduit, rebar, electrical boxes, exhaust vents, and ducting
- Trace hot wires behind walls, floors, and ceilings
- Find metal pipes behind tile and in concrete
- Find conduit, rebar, electrical boxes, exhaust vents, and ducts
Spec Summary:
|
Dimensions: |
6.38 H x 3.07 W x 1.34
D (162 x 78 x 34 mm) |
|
Weight: |
6.5 oz. (184 g) without battery |
|
Battery type: |
9-V alkaline (included) |
|
Estimated battery life: |
2 years at 10 minutes per day with alkaline battery |
|
Position accuracy: |
Stud Scan mode: typically
within 1/8 in. (3 mm) DeepScan mode: typically within 3/16 in. (5 mm) Metal Scan mode: typically within 1/2 in. (13 mm) |
|
Depth: |
Up to 3/4 in. (19 mm) in Stud
Scan mode Up to 1-1/2 in. (38 mm) in DeepScan mode Up to 1-1/2 in. (38 mm) for copper in Metal Scan mode Up to 3 in. (76 mm) deep for rebar in Metal Scan mode NOTE: Sensing depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc. |
|
AC Position accuracy: |
Typically 90–250 V at
50–60 Hz laterally within 6 in. (150 mm) of a hot unsheilded wire |
|
AC Depth: |
Typical depth of 2 in. (50 mm) |
|
Operating temperature: |
20 to 120°F (-7 to 49°C) |
|
Storage temperature: |
-20 to 150°F (-29 to 66°C) |
|
Humidity: |
80% RH (noncondensing) |
|
Water resistance |
Splash and water resistant, not waterproof |