Fluke 1587 Insulation Multimeter (50 - 1000V)

 Fluke 1587 Insulation Multimeter (50 - 1000V)
Item #: E605-1587
Manufacturer: Fluke Corporation
Manufacturer Item #: 1587
Product Type: Digital Multimeters
Your Price: $545.95
 In Stock
Fluke's Insulation Multimeter is packed with valuable features to help you on the job!
Features & Applications:

The Fluke 1587 Insulation Multimeter combines a digital insulation tester with a full-featured, True RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

Whether you work on motors, generators, cables, or switchgear, the easy-to-use Fluke 1587 Insulation Multimeter is ideally suited to help you with your tasks.

Features:

  • Large display with backlight
  • Insulation test: 0.01 Mohm to 2 Gohm
  • Insulation test voltages for many applications: 50V, 100V, 250V, 500 V, 1000 V
  • Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
  • Autodischarge of capacitive voltage
  • AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (ohms), Continuity
  • Capacitance, diode test, temperature, Min/Max, frequency (Hz)
  • Auto power off to save battery power
  • CAT III 1000 V, CAT IV 600 V measurement category
  • Included accessories: Remote probe, test leads and probes, alligator clips
  • K-type thermocouple
  • Filter for motor drive measurements
  • Accepts optional Fluke TPAK™ magnetic hanging system to free your hands for other work
  • Rugged, utility hard case allows you to bring everything you need for the job
  • 3 year manufacturer warranty

Spec Summary:

Specifications
Voltage DC:
Maximum Voltage: 1000V
Accuracy: ±(0.09%+2)
Maximum Resolution: 0.001V
Voltage AC:
Maximum Voltage: 1000V
Accuracy: ±(2%+3)
AC Bandwidth: 5kHz
with low pass filter; 3db @ 800 Hz
Current DC:
Maximum Amps: 400mA
Amps Accuracy: ±(0.2%+2)
Maximum Resolution: 0.01 mA
Current AC:
Maximum Amps: 400mA
Amps Accuracy: ±(1.5%+2)
1 kHz bandwidth
Maximum Resolution: 0.01 mA
Resistance:
 Maximum Resistance: 50 Mohms
Accuracy: ±(0.9%+2)
Maximum Resolution: 0.1ohms
Capacitance:
 Maximum Capacitance: 9,999 µF
Accuracy: ±(1.2%+2)
Maximum Resolution: 1 nF
Frequency:
 Maximum Frequency: 100 kHz
Accuracy: ±(0.1%+1)
Maximum Resolution: 0.01 Hz
Temperature Measurement:
-40.0 °F to 998 °F
-40.0 °C to 537 °C
excluding probe
Diode Test:
Range: 6V
Resolution: 1 mV
Accuracy: ±(2%+1)

Insulation Test
Minimum Test Current @
1kŁ/V:
 1mA
Test Voltages:
 50, 100, 250, 500, 1000 V
Maximum Resistance per
Test Voltage:
 50V:
100V:
250V:
500V:
1000V: 2 Gohms
Maximum Resolution per
Test Voltage:
 50V: 0.01 Mohms
100V: 0.01 Mohms
250V: 0.1 Mohms
500V: 0.1 Mohms
1000V: 0.1 Mohms
Accuracy per Test
Voltage:
 50V: ±(3 % + 5)
100V: ±(3 % + 5)
250V: ±(1.5 % + 5)
500V: ±(1.5 % + 5)
1000V: ±(1.5 % + 5)
to 600 Mohms, ±(10 % + 3)
above 600 Mohms

Environmental Specifications
Operating temperature:
 -4 to 131°F (–20 to +55 °C)
Storage temperature:
-40 to 140°F (-40 to +60°C)
Humidity (Without
Condensation):
0 - 95% (10 – 30 °C)
0 - 75% (30 – 40 °C)
0 - 40% (40 – 55 °C)
Operating Altitude:
6,561.6 ft ( 2000 m)

Safety Specifications
Overvoltage category
 Complies with ANSI/ISA 82.02.01
(61010-1) 2004, CAN/CSA-C22.2
NO. 61010-1-04, and IEC/EN
61010-1 2nd Edition for measurement
CAT III 1000 V and CAT IV 600 V
Agency approvals:
2000 m CAT III 1000 V, CAT IV 600 V;
3000 m CAT II 1000 V, CAT III 600 V

Mechanical & General Specifications
Size:
 7.9" x 3.9" x 1.9"
[203 x 100 x 50 mm] (with holster)
Weight:
 624 g
Warranty:
 3 years
Battery life Alkaline:
 Meter use: 1000 hours
Insulation test use: Meter can perform
at least 1000 insulation tests with fresh
alkaline batteries at room temperature.
These are standard tests of 1000 V into
1 Mohms with a duty cycle of 5 seconds on
and 25 seconds off.
IP Rating:
 IP40
Close Window