Fluke 43B Power Quality Analyzer

 Fluke 43B Power Quality Analyzer
Item #: E605-43B3
Manufacturer: Fluke Corporation
Manufacturer Item #: 43B/003
Product Type: Power Analyzers
Your Price: $2,847.95
Get the most useful capabilities of a power quality analyzer, multimeter and scope with the Fluke 43B Power Quality Analyzer
Features & Applications:

The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems, and diagnose equipment failures. All these powerful features are housed in a rugged handheld package.

Features:

  • NiMH Battery provides extended operating time of 6.5 hours
  • Combines the most useful capabilities of a power quality analyzer, multimeter and scope
  • Calculates 3-phase power on balanced loads, from a single-phase measurement
  • Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current
  • Monitoring functions help track intermittent problems and power system performance
  • Records two selectable parameters for up to 16 days
  • 20 measurement memories to save/recall screens and data with cursor readings
  • FlukeView® software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic
  • Measures resistance, diode voltage drop, continuity, and capacitance
  • Users/applications manual and power quality video to help answer tough questions
  • Complete package with voltage probes and 400 A current clamp, FlukeView Software and optically isolated interface cable
  • 3 year warranty on the Fluke 43B, 1 year on accessories

Spec Summary:

Specifications
Input Characteristics:
 Input impedance: 1 MΩ, 20 pF
Voltage rating: 600V rms, CAT III
V/A/Hz Display:
 True-rms voltage (ac + dc)
Ranges: 5.000 V, 50.00 V, 500.0 V, 1250 V*
Accuracy: ±(1% + 10 counts)
True-rms current (ac + dc)
Ranges: 50.00 A, 500.0 A, 5.000 kA , 50.00 kA, 1250 kA
Accuracy: ±(1% + 10 counts)
Frequency ranges: 10.0 to 15.0 kHz
Accuracy: ±(0.5% + 2 counts)
CF Crest factor Ranges: 1.0 - 10.0
Accuracy: ±(5% + 1 count)
Power Display:
 Watts, VA, VAR
1-phase and 3-phase,
3 conductor balanced loads
Ranges: 250 W - 1.56 GW
Accuracy: ±(4% + 4 counts) Fundamental Power
Accuracy: ± (2 % + 6 counts) Total Power
PF Power Factor
Range: 0 - 1.0
Accuracy: ±0.04
DPF Displacement Power
Factor, Cos .F
Range: 0.25 - 0.9
Accuracy: ±0.04
Range: 0.90 - 1.0
Accuracy: ±0.03
H2 Frequency Fundamental
Ranges: 40.0 to 70.0 Hz
Accuracy: ±(0.5% + 2 counts)
Harmonics Display:
 Voltage, Current,
Frequency
Ranges: Fundamental to 51st harmonic
Fundamental: VA ±(3% + 2 counts) W ±(5% + 2 counts)
2 to 31st harmonic: VA ±(5% +3 counts) W ±(10% +10 counts)
32 to 51st harmonic: VA ±(15% +5 counts) W ±(30% +5 counts)
Frequency Fundamental
Ranges: 40 Hz to 70 Hz
Accuracy: ±0.25 Hz
Phase Range: V, A (between Fundamental & Harmonics)
Accuracy: ±3º to ±15º
Range: W (between Voltage Fundamental & Current Harmonics)
Accuracy: ±5º to ±15º
K-factor (Current and Power)
Range: 1.0 to 30.0
Accuracy: ±10%
THD Total Harmonic Distortion
Range: 0.00 - 99.99
Accuracy: ±(3% + 8 counts)
Sags and Swells:
 Recording times: 4 min to 16 days (selectable)
Vrms Actual, Vrms max,
min(AC + DC)
Ranges: 5.000V, 50.00V, 500.0V, 1250V*
Accuracy: Readings ±(2% +10 counts);
Cursor readings ± (2% + 12 counts)
Arms Actual, Arms max, min (AC + DC)
Ranges: 50.00A, 500.0A, 5.000 kA, 50.00 kA
Accuracy: ±(2% +10 counts)
Transient Capture:
 Minimum pulse width: 40 ns
Useful bandwidth input 1: DC to 1 MHz
Number of transients: 40
Voltage threshold settings: 20%, 50%,
100%, 200% above or below reference
Reference signal: After START, the Vrms and frequency
of the signal are measured. From these data a pure sinewave
is calculated as reference for threshold setting.
Vpeak min, Vpeak max at cursor: 0 V, 25 V, 50 V, 125 V,
250 V, 500 V, 1250 V
Accuracy: ±5% of full scale
R, C, Diode, Continuity:
 Resistance ranges: 500.0 Ω, 5.000 kΩ, 50.00 kΩ,
500.0 kΩ, 5.000 MΩ, 30.00 MΩ
Resistance accuracy: ±(0.6% + 5 counts)
Capacitance ranges: 50.00 nF, 500.0 nF, 5.000 µF,
50.00 µF, 500.0 µF
Capacitance accuracy: ±(2% + 10 counts)
Diode Ranges: 0 to 3.000 V
Accuracy: ±(2% + 5 counts)
Continuity: Beeper on at < 30 Ω ± 5 Ω
Max current: 0.5 mA
Temperature: °F or °C
Inrush Current:
 Inrush times: 1 s, 5 s, 10 s, 50 s, 100 s, 5 min
Current ranges: 1 A, 5 A, 10 A, 50 A, 100 A, 500 A, 1000 A
Cursor readings: A peak max at cursor 1 and cursor 2
Accuracy: ±5% of full scale
Time between cursors: 4 to 235 pixels (1 pixel = inrush time/250)
Accuracy: ±(0.2% + 2 pixels)
Temperature (with
accessory):
 Range: -148 - 752°F (-100 - 400°C)
Accuracy: ±(0.5% + 5 counts)
Scope Display:
 Measurements: dc, ac, ac+dc, peak, peak-peak, frequency, duty
cycle, phase, pulse width, crest factor
Time ranges: 20 ns/div to 60 s/div
Max sampling rate: 25 MS/s
Bandwidth
Voltage channel [1]: 20 MHz at inputs, 1 MHz with TL24 Leads
Current channel [2]: DC to 15 kHz at inputs, 10 kHz with i400s
Current Clamp
Coupling: AC, DC (10 Hz - 3 dB)
Vertical sensitivity: 5 mV/div to 500V/div
Vertical resolution: 8 bit (256 levels)
Record length: 512 samples per channel
Base ranges: 60 S/div to 20 nS/div ± (0.4% + 1 pixel)
Timebase modes: Normal, roll, single
Pre-trigger: Up to 10 divisions
Trigger Source: Input 1 or Input 2 or automatic selection
Trigger Mode: Automatic Connect-and-View™, Free Run,
and Single Shot
Connect-and-View: Advanced automatic triggering that
recognizes signal patterns
Automatically adjusts triggering, timebase and amplitude
and displays stable pictures
Memories:
 20 (screens, settings, data)
Recording:
 Recording times: 4 min to 16 days (selectable)
Parameters: Choose one or two parameters from one of
the groups below:
Volts/Ampères/Hertz
Power: Watts, VA, VAR, PF, DPF, Frequency
Harmonics, THD, Volts (Fund. & Harmonic), Ampères
(F&H) Watts(F&H)
Frequency (H), %(H) of total, Phase(H), KF
Temperature
Resistance: Resistance, Diode, Continuity, Capacitance
Scope: DC Voltage, DC Current, AC Voltage, AC Current,
Frequency, Pulse Width + or -, Phase, Duty cycle + or -,
Peak max, Peak min, Peak min-max, Crest Factor
Note:
 *Rated EN 61010-1 600 V CAT II CSA

Environmental Specifications
Operating Temperature:
 32 to 122°F (0 to +50°C)

Safety Specifications
Electrical Safety:
 EN 61010-1 CAT II, 600V. CSA listed

Mechanical & General Specifications
Size:
 9.13" x 4.52" x 1.96"
(232 x 115 x 50 mm)
Weight:
 1.1 kg
Warranty:
 3 years
Battery Life:
 Rechargeable NiMH pack
(charger included), 6.5 hrs
extended operating time
(continuous)
Shock & Vibration:
 Mil 28800E, Type 3, Class III,
Style B
Case:
 IP51 (dust, drip, waterproof)
Close Window