Fluke 789 ProcessMeter

 Fluke 789 ProcessMeter
Item #: P609-7890
Manufacturer: Fluke Corporation
Manufacturer Item #: Fluke-789
Product Type: Process Calibrator
Your Price: $810.95
Get twice the power with the Fluke 789 ProcessMeter!
Features & Applications:

Fluke combined a loop calibrator and a DMM to give process technicians double the power in one tool. Now we made it even better – the ultimate loop calibration multimeter – the Fluke 789 ProcessMeter. The 789 has a display that's not only twice as large, but also twice as bright with two levels of backlighting. With its built–in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.

Features:

  • 24 V Loop power supply
  • HART mode setting with loop power (adds 250 ohm resistor)
  • 100 % larger dual display
  • 1,200 ohm drive capability on mA source
  • Enhanced backlight with two brightness settings
  • 0-100 % mA Span Check buttons to toggle between 4 and 20 mA
  • Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1
  • Externally accessible fuses for easy replacement
  • DMM designed to meet 1000 volt IEC 1010 CAT III standards
  • Precision 1000 V, 440 mA true-rms digital multimeter
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode Test and Continuity Beeper
  • Simultaneous mA and % of scale readout
  • 20 mA dc current source / loop calibrator / simulator
  • Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes
  • Includes:
    • Fluke 789 Process Meter
    • TL71 Premium Test Lead Set
    • C72 Alligator Clips
    • Four AA alkaline batteries (installed)
    • Users Manual and Quick Reference Guide

Spec Summary:

Specifications
Current Measurement:

Range: 0-1 A AC or DC
Resolution: 1 mA
Accuracy: 0.2% + 2 LSD (DC)
Range: 0-30 mA
Resolution: 0.001 mA
Accuracy: 0.05% + 2 LSD

Current Sourcing:
Range: 0-20 mA or 4-20 mA
Resolution: 0.05% of span
Drive Capability: 24 V Compliance or 1200 Ω @ 20 mA
Frequency:
 to 19.999 kHz, 0.005% + 1 LSD
Continuity:
 Beeps for resistance < 100 Ω
Voltage Measurement:
Range: 0-1000 V AC (true-rms) or DC
Resolution: 0.1 mV to 1.0 V
Accuracy: 0.1% Rdg + 1 LSD (VDC)
Resistance Measurement:
to 40 MΩ, 0.2% + 1 LSD
Diode Test:
2.0 V shows diode voltage drop
Environmental Specifications
Operating Temperature:
-4 to 131°F (-20 to 55ºC)
Storage Temperature:
 -40 to 140°F (-40 to 60ºC)
Humidity (Without Condensation):
 95% up to 86°F (30ºC)
75% up to 104°F (40ºC)
45% up to 122°F(50ºC)
35% up to 131°F (55ºC)
Temperature Coefficient:
0.05 x (specified accuracy) per ºC (for
temperatures < 18 ºC or > 28 ºC)
Safety Specifications
Electrical Safety:
Designed in accordance with IEC 1010-1,
ANSI/ISA S82.01-1994 and CAN/CSA
C22.2 No. 1010.1-92
Overvoltage Category:
IEC 1010-1 CAT III 1000 V
IEC 1010-1 CAT IV 600 V
Maximum Voltage:
1000 V rms
Mechanical & General Specifications
Size:
 1.25" H x 3.41"W x 7.35" L (50 x 100 x 203 mm)
Weight:
 13 oz. (600 g)
Batteries:
 4 AA Alkaline batteries
Warranty:
 3 years
Battery Life:
140 hours typical (measurement), 10 hours typical
(sourcing 20 mA)
Shock & Vibration:
Random, 2 g, 5-500 Hz
1 meter drop test
Close Window