Casella 450.B2 Octave Band Sound Level Meter Kit

Casella 450.B2 Octave Band Sound Level Meter Kit

You may still order back-ordered items.
This product is expected to ship after 02/28/2012.
Our Guarantee

Casella 450.B2 Octave Band Sound Level Meter Kit is designed to react to noise much like the human ear

Item #: Q412-0450
Manufacturer: Casella USA
Manufacturer Item #: CEL-450.B2/K1
Product Type: Octave Band Sound Level

Your Price $4,017.95

 Write a Review

Features & Applications:

The Casella 450.B2 Sound Level Meter Kit offers the power of digital signal processing (DSP) technology in a small lightweight unit. The instrument provides all the features of a broadband meter while simultaneously offering the ability to measure noise levels in whole or third octave bands across a wide range of frequencies that cover the whole audible range.

The major benefit of the Sound Level Meter Kit is the ease with which it can make full range noise measurements in difficult situations such as those encountered with transient sources. These can include impacts, pass-by testing of vehicles, flyover tests for aircraft, shooting ranges and other similar noise difficult to measure sources. The ultra wide dynamic range of 140 dB means that it is not necessary to worry about selecting the right range as the meter is always on the right range. Noise parameters such as the max, min, average, peak etc. can be enabled or disabled depending upon the exact requirements of the task in hand. Data log the results from 10 msec to 30 minutes to collect history of the level changes.

Kit Includes:

  • CEL-450.B2 real time octave band ANSI type 2 meter
  • CEL-110/2 acoustic calibrator
  • CEL-4672 foam windscreen
  • CEL-6722 attache style kit case
  • C6724 pc download cable
  • CEL-6813 dB23 pc software
  • 4 x AA batteries for meter, 1 x 9V battery for calibrator and operator manuals
Features:

  • Single 140dB ultra-wide dynamic range
  • Real time measurements in octaves from 16 Hz to 16 kHz
  • Real time measurements in third octaves from 12.5 Hz to 20 kHz
  • Simultaneous measurements of A, C and Z (linear) levels
  • Max, min, average, peak measurements
  • Q = 3, 4, 5 or 6 exchange rates available
  • Data logging intervals as fast as every 10 msec per sample
  • 999 separate runs
  • Over 800,000 data points
  • Operating Temp: 12 to 122º F (-10º C to 50º C)
  • Storage Temp: 0 to 140º F
  • Includes Certificate of Conformance

Applications:

  • Long term noise surveys
  • Reverberation time measurements
  • All types of general noise measurements
  • Frequency analysis of transient noise impulses
  • Workplace noise surveys
  • Transportation noise studies
  • ANSI/IEC type 1 & 2 models

Note: Batteries last 15 hours without filter and 12 hours with filter. Spec Summary:

Octave and third octave band
measured parameters:
Instantaneous level Lxy, maximum level Lxymx, minimum level Lxymn,
average level Lxeq, peak level Lxpk
Acoustic accuracy: ANSI S1.4 (R1997) type 2, IEC 61672:2002, IEC 60651 :
1994, IEC 60804 : 2000, IEC 61260 : Class 0
Frequency response (Hz): 6.3 Hz to 30 kHz for -3 dB down points
Octave band center frequencies: 11 simultaneous bands with center frequencies 16 Hz to 16 kHz
Third octave band frequencies: 33 simultaneous bands with center frequencies 12.5 Hz to 20 kHz
Time weightings (response): Slow, Fast and Impulse for rms.
Peak frequency weighting: 'A', 'C' or 'Z' separate from rms. weighting
Dynamic range for calculations: 140 dB
Noise floor (dB): 16.5 'A' weighted, 19.7 'C' weighted, 23.4 'Z' weighted
Maximum noise level (dB): 140 dB rms., 143 dB peak (with standard 50 mV/Pa CEL-250 mic)
Resolution (dB): 0.1 dB across whole range
DSP sampling rate (Hz): 67,200 Hz sampling with true rms. values calculated digitally
Histogram classwidth (dB): 143 x cells at 1 dB steps for full 140 dB range plus over-range and
under-range cells (selectable for broadband measurements)
Memory storage capability: 2 Mbytes (over 800,000 data points) 25,000 full octave spectra,
Sampling intervals, up to 4 time
history profiles (user selected):
18 times from 10, 20, 50, 100, 250, 500 msec 1, 5, 10, 15, 20, 30 sec
1, 5, 10, 15, 20, 30 min
Fixed duration for measurement: 12 durations from 1, 5, 10, 15, 20, 30 min 1, 2, 4, 8, 12, 24 hour
Calibration method: Manual or automatic set to user entered dB level, last 4 calibration
details saved for review and verification of stability
Configurations saved in memory: 1 factory default plus 4 user setups saved per bandwidth
Analog outputs: AC signal 0.5 V rms. at 94 or 114 dB FSD
(plus optional log DC output 0 to 2 V for 0 to 140 dB at 14.28 mV/dB)
Digital output: Download of stored data to pc or remote control of operations of
meter via dB23 software
Baud rate for digital transfer: 8 settings from 9600 to 115200 baud
Screen languages: English, French, German, Italian, Spanish menu selectable
LCD screen display: 128 x 64 pixel monochrome backlit display with icon indicators
Size: 13.4 x 4 x 1.5 in (340 x 100 x 40 mm)
Weight: 19.3 oz (550 gm)
Tripod socket: Standard camera thread (1/4 inch)
Internal power supply: 4 off AA alkaline cells
External power supply: 12 V dc at 150 mA nominal via 2.1 mm power connector
Casella 450.B2 Octave Band Sound Level Meter Kit Manual

Click the link(s) above to open the document(s) for this item. Should you wish to download it, right click on the link and select "Save Target As..." or "Save Link As...".

If you do not have Acrobat Reader, click here to download the latest version.

Other versions of Casella Octave Band Sound Level Meter Kit are also Available:

Casella 490.B2 Octave Band Sound Level Meter Kit Casella 490.B2 Octave Band Sound Level Meter Kit
Your Price: $4,494.95
MORE INFO
Casella 450.B2 Octave Band Sound Level Meter Kit

Casella 450.B2 Octave Band Sound Level Meter Kit

Buy Now