Casella Microdust Pro Real-Time Dust Monitor Kit
In stock! Usually ships within 1 business day.
Casella Microdust Pro Real-Time Dust Monitor provides reliable, real-time, dust exposure data
Item #: Q412-1822
Manufacturer: Casella USA
Manufacturer Item #: 176000A
Product Type: Dust Monitor
Your Price $4,594.95
Click here to view Particle Counter Shop and Compare chart
Features & Applications:
The Microdust Pro Real-Time Dust Monitor Kit from Casella USA is a portable, real time monitor for assessing the concentration of suspended particulate matter, and is probably the most versatile instrument available with the ability to measure from 1µgm-3 to 2500 mgm-3. It is the only handheld real-time dust monitor on the market capable of graphically presenting variations in dust concentration on a real time scrolling graph – no longer is it necessary to wait to analyze results on a PC.
Kit Includes:
- Microdust Pro dust monitor with detachable optical probe
- Cleaning bellows for probe
- Individual calibration filter for probe
- Download cable to pc
- Windust Pro pc software for viewing measurements
- 4 x AA size rechargable NiCad batteries
- Worldwide power supply and charger unit for battery pack, Operator manual
Features:
- Wide range from 1µgm-3 to 2500 mgm-3 in single meter
- Data-logger with >15,700 readings
- Detachable probe
- TSP, PM10, PM2.5 or respirable measurements
- Firmware calibration and zero in the field
- 4 user defined calibration routines available for differing dust types
- Alkaline or rechargeable batteries or mains power
- 32bit WinDustPro PC software as standard
- Includes Certificate of Conformance
Applications:
- Occupational health & safety monitoring
- Walk through surveys
- Site boundary monitoring & environmental measurement
- Industrial process monitoring
- Testing respiratory equipment or air filtration efficiency
- Research activities
| Sensing Technique: | Near forward light scattering - 880nm infrared |
| Ranges: | All instruments provide 0 to 2500 mgm-3 over four ranges as standard: |
| Resolution: | 0.001 mgm-3 (1µgm-3) |
| Operating Temp Range: | 32 to 122 °F (0 to 50°C) non condensing |
| Storage Temp Range: | -4 to 131 °F (-20 to +55°C) |
| Calibration: | Gravimetric method using 'Arizona Fine' calibration dust (ISO12103-1, A2) |
| Zero Stability: | ±0.002 mgm-3/ °C |
| Span Stability: | <0.7% FSD / °C |
| POWER | |
| Battery: | 4 x AA / MN1500 cells - Alkaline or rechargeable NiCad |
| Operating Duration: |
Alkaline (2700mAh) typically
>20 hours NiCad cells (950mAh) typically >10 hours |
| Battery Charging: | Internal NiCad fast charger circuitry (with time-out protection) |
| Charge Rate: | Fast charge rate 450mA, Standby charge rate 55mA |
| Power Adapter: | Universal input voltage range 100-240VAC, 47-63Hz |
| Output: | 12VDC @ 800 mA |
| GENERAL | |
| Analogue Output: | 0 to 2.5 VDC FSD, 500Ω output impedance (3ms update rate) |
| Keypad: | 7 key tactile membrane |
| Weight: | Instrument only = 34.6 oz (0.97 Kg) (complete kit plus case = 10lb - 4.5Kg) |
| Dimensions: |
Probe = 1.4 Ø x 11.6 in
(35mm Ø x 290mm) total length Instrument H x W x D = 9.8" x 3.8" x 2.0" (245 x 95 x 50mm) |
| Maintenance: | Factory cleaning required annually depending on measurement conditions |
| DISPLAY | |
| Display: | 128 x 64 pixel LCD graphics panel with backlight |
| Displayed Values: | |
|
Instantaneous reading: Other readings: |
Rolling average
concentration over a user selectable period (1 to 60 sec) AVE & MAX concentration since power on or reset |
| Scrolling Graphs: | 100 / 200 seconds, 15 minutes or 60 minutes (Y Axis auto-ranging or fixed) |
| Battery voltage: | Battery Voltage with 'OK' / 'Low' status message. |
| CALIBRATION | |
| Factory Calibration: | Traceable isokinetic technique (wind tunnel) and ISO 12103-1 |
| User Calibration: | Four user defined calibration settings available stored for later use. |
| Routine Calibration: |
Firmware calibration for
zero & span setting in the field by user. Optical calibration filter supplied (restores factory calibration) |
| DATA LOGGING | |
| Internal Memory: | 64K EEPROM providing 15,700 data points |
| Logging Interval: | Adjustable from 2 to 600 seconds. |
| Recorded Values: | Average, spot, max & min concentration over logging period |
| Serial Interface: | RS232 up to 38.4K baud |
Casella Microdust Pro Real-Time Dust Monitor Kit Manual
Click the link(s) above to open the document(s) for this item. Should you wish to download it, right click on the link and select "Save Target As..." or "Save Link As...".
If you do not have Acrobat Reader, click here to download the latest version.
Click the link(s) above to open the document(s) for this item. Should you wish to download it, right click on the link and select "Save Target As..." or "Save Link As...".
If you do not have Acrobat Reader, click here to download the latest version.
