Fluke 115 Multimeter
Look no further than the Fluke 115 Multimeter for all of your electrcial testing needs!
Item #: E610-8790
Manufacturer: Fluke Electronics
Manufacturer Item #: 2538790
Product Type: Multimeter
Your Price $167.95
Features & Applications:
The Fluke 115 Multimeter is a True RMS meter that can be utilized by field service technicians to perform a wide range of electrical and electronic testing tasks.
Features:
- AutoVolt: automatic ac/dc voltage selection
- Large white LED backlight to work in poorly lit areas
- Resistance and continuity
- Min/Max/Average to record signal fluctuations
- CAT III 600 V safety rated
- Safety conformance: All inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TÜV listed and VDE.
- Includes:
- Multimeter
- Installed 9 V battery
- TL 75 Test leads
Spec Summary:
| Specifications | |
| Maximum voltage between any terminal and earth ground: |
600 V |
| Surge protection: | 6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2 |
| Display: | Digital: 6,000 counts, updates 4 per second |
| Bar graph: | 33 segments, updates 32 per second |
| Operating Temperature: | 14 to 122°F (-10 to + 50°C) |
| Storage Temperature: | -40 to 140°F (-40 to + 60°C) |
| Battery type: | 9 volt Alkaline, NEDA 1604A/ IEC 6LR61 |
| Battery Life: | 400 hours typical, without backlight |
| Accuracy Specifications | |
| DC millivolts: | Range: 600.0 mV Resolution: 0.1 mV Accuracy: ± ([% of reading] + [counts]): 2.0% + 3 |
| DC volts: | Range/Resolution: 6.000 V / 0.001 V Range/Resolution: 60.00 V / 0.01 V Range/Resolution: 600.00 V / 0.1 V |
| Auto volts: | Range: 600.0 V Resolution: 0.1 V Accuracy: 2.0 % + 3 (dc, 45 Hz to 500 Hz) 4.0 % + 3 (500 Hz to 1 kHz) |
| AC millivolts1 true-rms: | Range: 600.0 mV Resolution: 0.1 mV Accuracy: 1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz) |
| AC volts1 true-rms: | Range/Resolution: 6.000 V / 0.001 V Range/Resolution: 60.00 V / 0.01 V Range/Resolution: 600.0 V / 0.1 V Accuracy: 1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz) |
| Continuity: | Range: 600 Ω Resolution: 1 Ω Accuracy: Beeper on < 20 Ω, off > 250 Ω; detectsopens or shorts of 500 μs or longer. |
| Ohms: | Range/Resolution: 600.0 Ω / 0.1 Ω Range/Resolution: 6.000 kΩ / 0.001 kΩ Range/Resolution: 60.00 kΩ / 0.01 kΩ Range/Resolution: 600.0 kΩ / 0.1 kΩ Range/Resolution: 6.000 MΩ / 0.001 MΩ Accuracy: 0.9 % + 1 Range/Resolution: 40.00 MΩ / 0.01 MΩ Accuracy: 1.5 % + 2 |
Notes:
1) All ac voltage ranges are specified from 1 % to 100% of range. Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together. For volts, crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale. AC volts is ac-coupled. Auto-V LoZ, and ac mV are dc-coupled.
2) Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage.
| Mechanical & General Specifications | |
| Size: | Height: 10.875" (27.62 cm) Length: 6.25" (15.875 cm) Width: 2.203"(5.6 cm) |
| Weight: | 1.34 lbs (607 g) |
| Warranty: | 3 years |
| Product Description: | Price: | Your Cart: | |
|---|---|---|---|
 |
Extended Warranty (5 yrs) | $19.95 | Add |
 |
Fluke Test Lead Set | $21.95 | Add |
 |
Fluke TL223 SureGrip Electrical Tester | $62.95 | Add |
 |
Fluke AC285 SureGrip Large Alligator Clips | $18.95 | Add |
 |
Fluke AC87 Test Lead Accessory Bus Bar Clip | $33.99 | Add |
 |
Fluke 80TK Type K Thermocouple Module | $116.95 | Add |
 |
Fluke TL28A Automotive Test Lead Set | $39.95 | Add |
