.jpg){kind=small}
Fluke 1587 Insulation Multimeter (50 - 1000V)
In stock! Usually ships within 1 business day.
Fluke's Insulation Multimeter is packed with valuable features to help you on the job!
Item #: E605-1587
Manufacturer: Fluke Electronics
Manufacturer Item #: 1587
Product Type: Digital Multimeters
Your Price $677.95
Purchase this product with Fluke SureGrip Master Accessory Set for only $122.95 more!
Features & Applications:
The Fluke 1587 Insulation Multimeter combines a digital insulation tester with a full-featured, True RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.
Whether you work on motors, generators, cables, or switchgear, the easy-to-use Fluke 1587 Insulation Multimeter is ideally suited to help you with your tasks.
Features:
- Large display with backlight
- Insulation test: 0.01 Mohm to 2 Gohm
- Insulation test voltages for many applications: 50V, 100V, 250V, 500 V, 1000 V
- Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
- Autodischarge of capacitive voltage
- AC/DC voltage, DC milliVolts, AC/DC milliamps, Resistance (ohms), Continuity
- Capacitance, diode test, temperature, Min/Max, frequency (Hz)
- Auto power off to save battery power
- CAT III 1000 V, CAT IV 600 V measurement category
- Included accessories: Remote probe, test leads and probes, alligator clips
- K-type thermocouple
- Filter for motor drive measurements
- Accepts optional Fluke TPAK™ magnetic hanging system to free your hands for other work
- Rugged, utility hard case allows you to bring everything you need for the job
- 3 year manufacturer warranty
Spec Summary:
| Voltage DC: | Maximum Voltage: 1000V Accuracy: ±(0.09%+2) Maximum Resolution: 0.001V |
| Voltage AC: | Maximum Voltage: 1000V Accuracy: ±(2%+3) AC Bandwidth: 5kHz with low pass filter; 3db @ 800 Hz |
| Current DC: | Maximum Amps: 400mA Amps Accuracy: ±(0.2%+2) Maximum Resolution: 0.01 mA |
| Current AC: | Maximum Amps: 400mA Amps Accuracy: ±(1.5%+2) 1 kHz bandwidth Maximum Resolution: 0.01 mA |
| Resistance: | Maximum Resistance: 50 Mohms Accuracy: ±(0.9%+2) Maximum Resolution: 0.1ohms |
| Capacitance: | Maximum Capacitance: 9,999 µF Accuracy: ±(1.2%+2) Maximum Resolution: 1 nF |
| Frequency: | Maximum Frequency: 100 kHz Accuracy: ±(0.1%+1) Maximum Resolution: 0.01 Hz |
| Temperature Measurement: | -40.0 °F to 998 °F -40.0 °C to 537 °C excluding probe |
| Diode Test: | Range: 6V Resolution: 1 mV Accuracy: ±(2%+1) |
| Insulation Test | |
| Minimum Test Current @ 1kŁ/V: |
1mA |
| Test Voltages: | 50, 100, 250, 500, 1000 V |
| Maximum Resistance per Test Voltage: |
50V: 100V: 250V: 500V: 1000V: 2 Gohms |
| Maximum Resolution per Test Voltage: |
50V: 0.01 Mohms 100V: 0.01 Mohms 250V: 0.1 Mohms 500V: 0.1 Mohms 1000V: 0.1 Mohms |
| Accuracy per Test Voltage: |
50V: ±(3 % + 5) 100V: ±(3 % + 5) 250V: ±(1.5 % + 5) 500V: ±(1.5 % + 5) 1000V: ±(1.5 % + 5) to 600 Mohms, ±(10 % + 3) above 600 Mohms |
| Environmental Specifications | |
Operating temperature: |
-4 to 131°F (20 to +55 °C) |
Storage temperature: |
-40 to 140°F (-40 to +60°C) |
| Humidity (Without Condensation): |
0 - 95% (10 30 °C) 0 - 75% (30 40 °C) 0 - 40% (40 55 °C) |
Operating Altitude: |
6,561.6 ft ( 2000 m) |
| Safety Specifications | |
| Overvoltage category | Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V |
| Agency approvals: | 2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V |
| Mechanical & General Specifications | |
| Size: | 7.9" x 3.9" x 1.9" [203 x 100 x 50 mm] (with holster) |
| Weight: | 624 g |
| Warranty: | 3 years |
| Battery life Alkaline: | Meter use: 1000 hours Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 Mohms with a duty cycle of 5 seconds on and 25 seconds off. |
| IP Rating: | IP40 |
| Product Description: | Price: | Your Cart: | |
|---|---|---|---|
 |
400 Amp Current Clamp | $132.95 | Add |
 |
Fluke i1010 AC/DC Current Clamp For DMM'S | $339.95 | Add |
 |
Fluke TL27 Heavy Duty Test Lead Set | $27.95 | Add |
 |
Fluke Multimeter Soft Case | $32.95 | Add |
 |
Fluke Thermocouple Adapter Accessory | $21.95 | Add |
