Fluke 434 Three Phase Power Quality Analyzer

Locate, predict, prevent and troubleshoot problems with Fluke's 3-Phase Power Quality Analyzer

Item #: E605-4343 Manufacturer: Fluke Electronics Manufacturer Item #: 434/003 Product Type: Power Analyzers

	List Price:		$4,842.95

Features & Applications:

The Fluke 434 three-phase power quality analyzer helps you locate, predict, prevent and troubleshoot problems in power distribution systems. These easy-to-use handheld tools have many innovative features to give you the details to pinpoint problems faster and safer.

Features:

• Complete three-phase troubleshooting tool: measures virtually every power system parameter, including voltage, current, frequency, power, power consumption (energy), unbalance and flicker, harmonics and inter-harmonics. Captures events like dips and swells, transients, interruptions and rapid voltage changes
• AutoTrend: no time wasted setting up additional trend graphs while every measurement is automatically recorded. Analyzes trends using cursors and zoom function while recording continues in the background
• System-Monitor: gives immediate insight into power system's quality. Checks conformity to limits specified in EN50160 or to own custom limits
• Four channels: simultaneously measures voltage and current on all three phases and neutral
• Automatic transient display: captures up to 40 dips, swells, interruptions or transients automatically
• Meets the stringent 600 V CAT IV, 1000 V CAT III safety standard required for measurements at the service entrance
• Rugged, handheld instrument operates for more than 7 hours on included rechargeable NiMH battery pack. Menu-driven interface simplifies operation
• Extensive data analysis possibilities. Cursors and zoom can be used 'live' while taking the measurements, or 'offline' on stored measurement data. The stored measurements can also be transferred to a PC with FlukeView software
• Complete package includes everything to get started: 4 current clamps, 5 voltages test leads and clips, line adapter/battery charger and hard case
• Complies with IEC 61000-4-30 measurement standards

Spec Summary:

Technical Data
Inputs:	Number: 4 voltage and current (3 phases + neutral) Maximum Voltage: 1000 Vrms (6 kV peak) Maximum Sampling Speed: 200 kS/s on each channel simultaneously
Volt/Amps/Hertz:	Vrms (AC + DC) Measurement range: 1 ... 1000 V Accuracy: 0.5% of Vnom Vpeak Measurement range: 1 ... 1400 V Accuracy: 5% of Vnom Crest factor Measurement range: 1.0 ... > 2.8 Accuracy: ±5% Arms (AC + DC) Measurement range: 0 ... 20 kA Accuracy: ±1% ± 5 counts Apeak Measurement range: 0 ... 5.5 kA Accuracy: 5% Crest factor Measurement range: 1 ... 10 Accuracy: ±5% Hz (60 Hz nominal) Measurement range: 51.00 ... 69.00 Hz Accuracy: ±1% ± 5 counts
Dips and swells:	Vrms (AC+DC) ³ Measurement range: 0.0% … 100% of Vnom Accuracy: ±1% of Vnom Arms (AC+DC) ³ Measurement range: 0 ... 20 kA Accuracy: ±1% ± 5 counts
Harmonics:	Harmonic (interharmonic) (n) Measurement range: DC, 1..50; (Off, 1..49) measured relative to fundamental or to total rms Vrms Measurement range: 0.0 … 1000 V Accuracy: ±5% ± 2 counts Arms Measurement range: 0.0 … 4000 mV x clamp scaling Accuracy: ±5% ± 5 counts Watts Measurement range: Depends on clamp scaling Accuracy: ±5% ± n x 2% or reading, ± 10 counts DC voltage Measurement range: 0.0 … 1000 V Accuracy: ±5% ± 10 counts THD Measurement range: 0.0 … 100.0% Accuracy: ±2.5% Hz Measurement range: 0 … 3500 Hz Accuracy: ± 1 Hz Phase angle Measurement range: -360º ... +360º Accuracy: ± n × 1.5º
Power and energy:	Watt, VA, VAR Measurement range: 1.0 … 20.00 MVA¹ Accuracy: ±1.5% ± 10 counts kWh, kVAh, kVARh Measurement range: 00.00 …200.0 GVAh¹ Accuracy: ± 1.5% ± 10 counts Power Factor/Cos Ф / DPF Measurement range: 0…1 Accuracy: ± 0.03
Flicker:	Pst (1 min), Pst, Plt, PF5 Measurement range: 0.00 … 20.00 Accuracy: ±5%
Unbalance:	Volts Measurement range: 0.0 … 5.0% Accuracy: ±0.5% Current Measurement range: 0.0 … 20% Accuracy: ± 1%
Transient Capture:	Volts Measurement range: ±6000 V Accuracy: ±2.5% of Vrms Minimum detect duration: 5 µs (200kS/s sampling)
Inrush Mode:	Arms (AC+DC) Measurement range: 0.000 … 20.00 kA¹ Accuracy: ±1% of meas ± 5 counts
Autotrend recording:	Sampling: Up to 100 readings/s continuous sampling per channel Memory: Up to 3600 min, max and avg points for each reading Recording time: Up to 450 days Zoom: Up to 12x horizontal zoom
Memory:	Screens: 50 Data sets including recordings: 10
Notes:	¹ Depending on clamp scaling ² 50 60/Hz nominal frequency according to IEC 61000-4-30 ³ Value is measured over 1 cycle, commencing at a fundamental zero crossing, and refreshed each half-cycle

Environmental Specifications
Operating Temperature:	32 to 122ºF (0 to +50ºC)
Storage Temperature:	-4 to 140ºF (-20 to +60ºC)
Operating Altitude:	9842 ft (3,000 m)

Standards
Measurement methods used:	IEC61000-4-30 class A
Power Quality:	EN50160
Flicker:	IEC 61000-4-15
Harmonics:	IEC 61000-4-7

Safety Specifications
Compliance:	IEC/EN61010-1 (2nd edition) pollution degree 2; CAN/CSA C22.2 No 101.1 ANSI/ISA S82.01

Mechanical & General Specifications
Size:	10" x 6.6" x 2.5" (256 x 169 x 64 mm)
Weight:	4.4 lb (2 kg)
Warranty:	3 years
Battery Life:	Rechargeable NiMH pack: >7 hours Charging time: 4 hours typical
Shock and Vibration:	MiL-PRF-2880F Class 2
Case:	P51 (dust, drip, waterproof)

Product Description:		Price:	Your Cart:
	Alligator clip set	$19.25	Add
	AC Current Clamp	$221.95	Add
	Small Size 200AMP Current Clamp w/ BNC	$173.95	Add
	3000 AMP AC Current Clamp	$1,046.95	Add

Fluke 434 Three Phase Power Quality Analyzer Manual

Click the link(s) above to open the document(s) for this item. Should you wish to download it, right click on the link and select "Save Target As..." or "Save Link As...".

If you do not have Acrobat Reader, click here to download the latest version.