Fluke 789 ProcessMeter
Get twice the power with the Fluke 789 ProcessMeter!
Item #: P609-7890
Manufacturer: Fluke Electronics
Manufacturer Item #: Fluke-789
Product Type: Process Calibrator
Your Price $859.95
Purchase this product with FlukeŽ 80T-150U Universal Temperature Probe for only $206.95 more!
Features & Applications:
Fluke combined a loop calibrator and a DMM to give process technicians double the power in one tool. Now we made it even better the ultimate loop calibration multimeter the Fluke 789 ProcessMeter. The 789 has a display that's not only twice as large, but also twice as bright with two levels of backlighting. With its builtin, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.
Features:
- 24 V Loop power supply
- HART mode setting with loop power (adds 250 ohm resistor)
- 100 % larger dual display
- 1,200 ohm drive capability on mA source
- Enhanced backlight with two brightness settings
- 0-100 % mA Span Check buttons to toggle between 4 and 20 mA
- Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1
- Externally accessible fuses for easy replacement
- DMM designed to meet 1000 volt IEC 1010 CAT III standards
- Precision 1000 V, 440 mA true-rms digital multimeter
- Frequency measurement to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode Test and Continuity Beeper
- Simultaneous mA and % of scale readout
- 20 mA dc current source / loop calibrator / simulator
- Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
- Externally accessible battery for easy battery changes
- Includes:
- Fluke 789 Process Meter
- TL71 Premium Test Lead Set
- C72 Alligator Clips
- Four AA alkaline batteries (installed)
- Users Manual and Quick Reference Guide
Spec Summary:
| Specifications | |
| Current Measurement: | Range: 0-1 A AC or DC |
| Current Sourcing: | Range: 0-20 mA or 4-20 mA Resolution: 0.05% of span Drive Capability: 24 V Compliance or 1200 Ω @ 20 mA |
| Frequency: | to 19.999 kHz, 0.005% + 1 LSD |
| Continuity: | Beeps for resistance < 100 Ω |
| Voltage Measurement: | Range: 0-1000 V AC (true-rms) or DC Resolution: 0.1 mV to 1.0 V Accuracy: 0.1% Rdg + 1 LSD (VDC) |
| Resistance Measurement: | to 40 MΩ, 0.2% + 1 LSD |
| Diode Test: | 2.0 V shows diode voltage drop |
| Environmental Specifications | |
| Operating Temperature: | -4 to 131°F (-20 to 55ēC) |
| Storage Temperature: | -40 to 140°F (-40 to 60ēC) |
| Humidity (Without Condensation): | 95% up to 86°F (30ēC) 75% up to 104°F (40ēC) 45% up to 122°F(50ēC) 35% up to 131°F (55ēC) |
| Temperature Coefficient: | 0.05 x (specified accuracy) per ēC (for temperatures < 18 ēC or > 28 ēC) |
| Safety Specifications | |
| Electrical Safety: | Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92 |
| Overvoltage Category: | IEC 1010-1 CAT III 1000 V IEC 1010-1 CAT IV 600 V |
| Maximum Voltage: | 1000 V rms |
| Mechanical & General Specifications | |
| Size: | 1.25" H x 3.41"W x 7.35" L (50 x 100 x 203 mm) |
| Weight: | 13 oz. (600 g) |
| Batteries: | 4 AA Alkaline batteries |
| Warranty: | 3 years |
| Battery Life: | 140 hours typical (measurement), 10 hours typical (sourcing 20 mA) |
| Shock & Vibration: | Random, 2 g, 5-500 Hz 1 meter drop test |
