Fluke RLD2 HVAC/R UV Refrigerant Leak Detector Flashlight

This Fluke HVAC/R UV refrigerant leak detector flashlight uncovers refrigerant leaks instantly. Use the UV light to find the leakage area, then, use the laser pointer to pinpoint the exact leak...  MORE INFO

Price: $39.95

Malco Snap Lock Punch w/ Redline™ Handles - 3/8 in.

This Malco snap lock punch has an ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and feel for the way you work. Features easy one-hand-operation, including...  MORE INFO

Price: $49.95

KBHC Blade for Malco Fiberglass Duct Hole Cutter - 1-1/2 in.

This KBHC blade is for use with your Malco fiberglass duct hole cutter. It is for use on 1-1/2 (38.1 mm) inch ductboard...  MORE INFO

Price: $5.46

Malco Adjustable Snap Lock Punch w/ Redline™ Handles - 1/4 to 5/8 in.

This Malco adjustable snap lock punch has an ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and feel for the way you work. Features easy one-hand-operation,...  MORE INFO

Price: $38.95

Malco Duct Knife w/ Serrated Edge - Ergonomic Cushioned Grip - 6 in. L

This Malco duct knife can be used as an aid in fabricating fiberglass ductboard. Long life, double edge blade facilitates easy piercing for inside cuts. Double edge also ideal for tapping into and trimming...  MORE INFO

Price: $13.95

Malco Duct Stretcher - 16 in. L

Available Malco Duct Stretcher Styles: w/o Offset Handle | w/ Offset Handle

This Malco duct stretcher can be used to hold duct in place with one hand while slipping drive cleat in place with other hand. The low profile, straight body is designed to go anywhere, even in the...  

Malco Fiberglass Duct Hole Cutter

This Malco fiberglass duct hole cutter is supplied with standard double point utility knife blade for cutting 1 inch (25.4 mm) board. Use special No. KBHC blade for 1-1/2 (38.1 mm) inch ductboard Cuts...  MORE INFO

Price: $36.95

Malco Flex Duct Cutter - 11-7/8 in. L

This Malco flex duct cutter has a built-in wire cutter lets you finish the job you started with just one tool! Double edged blade cleanly pierces through outer skin and insulation. Cuts from either...  MORE INFO

Price: $39.95

Malco Flex Duct Shear - 12-1/4 in. L

This Malco flex duct shear cuts insulated flexible round duct and also cuts the duct liner’s wire rib coil. Pointed bottom blade easily pierces duct to start cut. Heavy duty wire cutter is located...  MORE INFO

Price: $37.95

Malco Flex Duct Tool, Multi Purpose - 11-7/8 in. L

This Malco flex duct tool is actually three tools in one! The finely honed double-edged knife blade cleanly pierces through the outer skin, insulation and liner construction of flexible round duct...  MORE INFO

Price: $59.95

Malco Folding Tool - 12 in. L

This Malco folding tool seams are formed from two steel halves, permanently joined together. Handy sight holes assure proper depth alignment. Ideal for HVAC applications such as folds for drive cleats...  MORE INFO

Price: $12.95

Malco Hand Notcher w/ Redline™ Handles

Available Malco Hand Notcher Sizes: 13/16 in. | 1 in.

This Malco hand notcher features an ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and feel for the way you work. Features easy one-hand-operation, including...  

Malco Hand Seamer w/ Redline™ Handles

Available Malco Hand Seamer Sizes: 3/4 in. W | 6 in. W

This Malco hand seamer has an ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and feel for the way you work. Features easy one-hand-operation, including an...  

Malco HVAC Starter Kit

Available Malco HVAC Starter Kit Versions: Mini Starter Kit | Starter Kit | Deluxe Starter Kit

This Malco HVAC deluxe starter kit contains 11 of the most popular HVAC tools and a bag of zip-in screws contained in a rust proof polypropylene tool box. 16-3/4” x 8” x 7-1/2” (43 x 20...  

Malco Locking Duct Stretcher - 12 in. L

This Malco locking duct stretcher pulls duct sections together and holds them in place while freeing both hands to align and install drive cleats. The DS3 locks on from either side of duct connection....  MORE INFO

Price: $30.95

Malco Nylon Tie Tensioning Tool w/ Auto Cut Off - 8-1/2 in. L

This Malco nylon tie tensioning tool is designed for a heavy user of nylon ties. An adjustment knob allows installer to set desired tension for securing flex duct to a take-off collar. When the tie...  MORE INFO

Price: $48.95

Malco Nylon Ties

Available Malco Nylon Ties Lengths: 36 in. L | 48 in. L

These Malco nylon ties can be used to install flexible duct to take-offs, or secure bundles, up to 15” (38 cm) diameter. Made of 100% nylon, Malco ties offer a minimal tensile strength of 175...  

Malco Offset Hand Seamer w/ Redline™ Handles - 3/4 in. W

This Malco offset hand seamer has an ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and feel for the way you work. Features easy one-hand-operation, including...  MORE INFO

Price: $51.95

Malco Offset Pipe Crimper w/ Redline™ Handles - 5 Blades - 1-5/8 in.

This Malco offset pipe crimper has an ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and feel for the way you work. Features easy one-hand-operation, including...  MORE INFO

Price: $35.95

Malco Pipe Crimper - Single Blade - 8 in. L

This Malco pipe crimper is fast, easy to use and lightweight. The handy lock makes tool pocket sized. It is made of zinc plated steel and features red grips. Features: Carbon steel blade Superior...  MORE INFO

Price: $19.95