Kidde® Ionization Combination Carbon Monoxide / Smoke Alarm, AC Wire-In w/ Battery Back-Up

Features & Applications:

This Kidde ionization combination carbon monoxide / smoke alarm features an 85dB horn alarm, as well as voice warnings that announces "Fire," "Carbon Monoxide," and "Low Battery". The detector operates on 120V with battery backup. View the full list of features below. Operating temperature is 40–100°F. Compliance: Meets NFPA 72.

Note: Interconnect up to 24 devices. Must interface directly with its own brand of interconnectable smoke and CO alarms.

Features:

• Smart InterconnectTM – Interconnects up to 24 Kidde devices (of which 18 can be initiating).
  
• Battery Backup (9V battery included) – Provides protection during power outages.
  
• Battery Lockout System – Minimized risk of mounting unit without installation of battery.
  
• Alarm Tamper Resist – Helps deter from tampering and theft.
  
• Adjustable Mounting Bracket – Makes installation fast and easy.
  
• Peak Level Memory – Announces “CO previously detected” if alarm had detected a CO level of 100ppm or higher since it was last reset.
  
• Smart HushTM Feature – Silences nuisance alarms for approximately 10 minutes. (Smoke must be present before Smart HushTM is activated)
  
• Ionization Sensor Technology – Ideal for detecting fast flaming and other types of fires.
  
• Green LED - Illuminates to indicate the unit is receiving AC power. Flashes every 5 seconds to indicate battery only mode. Flashes once per second (until reset) to indicate that the alarm sensed a smoke or CO hazard. Flashes every 2 seconds while the alarm is in HUSH® mode.
• Red LED - When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds.