Amprobe 5XP-A Digital Multimeter with Voltage Detection

Features & Applications:

The Amprobe 5XP-A Digital Multimeter combines features and accuracy in a small device. Each 5XP-A Multimeter has built-in non-contact voltage (NCV) detection, Magne-Grip holster and CAT III safety ratings.

Features:

• 27 ranges/10 functions – a complete performance, general purpose digital multimeter
• VolTect™ Non-Contact Voltage Detector lets you instantly identify dangerous AC voltage
• Magne-Grip™ holster with magnetic strap frees both hands for work
• 2000-count 3-1/2 digit display
• 750 V ac/ 1000 V dc – highest voltage rating in this class of meter
• Resistance and continuity for troubleshooting bad connections
• Battery load test with 1.5 volt and 9 volt capabilities
• Min/Max records minimum and maximum values
• Data Hold freezes display to “hold” measurement reading

Spec Summary:

Specifications
DC Current:
Ranges	200 µA, 2 mA, 20 mA, 200 mA
Resolution	0.1 µA
Accuracy	± (1.5 % rdg + 1 dgt)
Input protection	315 mA/1000 V fast blow ceramic fuse 6.3 x 32 mm on mA input
Burden voltage	300 mV max. (1 V max. on 200 mA range)

AC Current (45 Hz - 500 Hz):
Ranges	200 µA, 2 mA, 20 mA, 200 mA
Resolution	0.1 µA
Accuracy	± (2.0 % rdg + 5 dgts)
Input protection	315 mA/1000 V fast blow ceramic fuse 6.3 x 32 mm on mA input
Burden voltage	300 mV max. (1 V max. on 200 mA range)

Resistance:
Ranges	200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 2 MΩ, 20 MΩ
Resolution	100 mΩ
Accuracy on 200 Ω to 200 kΩ ranges	± (1.0 % rdg + 4 dgts)
Accuracy on 2 MΩ ranges	± (1.5 % rdg + 4 dgts)
Accuracy on 20 MΩ range	± (2.0 % rdg + 5 dgts)
Open circuit volts	0.3 Vdc typical, (3.0 Vdc on 200 Ω range)
Overload protection	1000 VDC or 750 VAC rms

Continuity:
Audible indication	75 Ω ± 25 Ω
Response time	100 ms
Overload protection	1000 VDC or 750 VAC rms

Diode Test:
Test current	1.0 mA (approximate)
Accuracy	± (1.5 % rdg + 3 dgts)
Resolution	1 mV
Open circuit volts	3.0 Vdc typical
Overload protection	1000 VDC or 750 VAC rms

Battery Test:
Ranges	1.5 V, 9 V
Resolution	1 mV, 10 mV
Accuracy	± (3.5 % rdg + 2 dgts)
Loaded current	150 mA typical for 1.5 V range, 5 mA typical for 9 V range
Overload protection	1000 VDC or 750 VAC rms on 9 V range, on VΩ input315 mA/1000 V fast blow ceramic fuse on 1.5 V range, on mA input
Non-Contact Voltage Indicator	Sense voltage 70 V to 600 VAC beeper chirps and big bright red LED comes on, works on all ranges

General Specifications
Display:
	3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999

Polarity:
	Automatic, positive implied, negative polarity indication

Overrange:
	(OL) or (-OL) is displayed

Zero: Automatic Low battery indication: The battery icon is displayed when the battery voltage drops below theoperating level

Measurement rate:
	2.5 times per second, nominal

Operating environment: 0 °C to 50 °C at <70 % R.H.

Storage temperature:
	-20 °C to 60 °C, 0 to 80 % R.H. with battery removed from meter

Accuracy:
	Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity

Temperature coefficient: 0.1 x (specified accuracy) per °C (0 °C to 18 °C, 28 °C to 50 °C)

Altitude:
	6561.7 feet (2000 M)

Power:
	Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22

Battery life:
	200 hours typical with carbon-zinc

Dimensions: 155 mm (H) x 72 mm (W) x 32 mm (D)

Weight:
	Approx. 210 g including battery

Safety:
	Designed to meet IEC 1010-1, Rev-2 CAT I 1000 V, CAT II 600 V,CAT III 300 V, class 2 and pollution deg. 2 indoor use. Complies with CE,and CSA 22.2 No. 1010-1 requirements.

Auxiliary Features:
	Min/Max Records the maximum reading in a measurement, records the minimum reading in a measurementData hold Freeze the latest reading on the displaymA jack Input warning detects wrong connection

Meterman 5XP Digital Multimeter with Voltage Detection Manual

Click the link(s) above to open the document(s) for this item. Should you wish to download it, right click on the link and select "Save Target As..." or "Save Link As...".

If you do not have Acrobat Reader, click here to download the latest version.