Microwave Leakage and AC/DC Voltage Detector Screwdriver

AC/DC Voltage, continuity, polarity & microwave leakage detector flathead screwdriver

Item #: E1020 Manufacturer: General Tools Manufacturer Item #: ST600 LED Product Type: Circuit Testers

	List Price:		$12.95

Features & Applications:

Use this sleek unit for quick and easy AC voltage testing for both contact and non-contact applications. Its unique, handy microwave leakage detection means you have one less instrument to carry - can also be used as a screwdriver.

Features:

• AC Voltage Test: Contact method: 70 to 250 VAC, Non-contact method:
  70 to 600 VAC
• DC Voltage Test: Up to 250 VDC
• Polarity Test: 1.5V to 36 VDC
• Continuity check: 0 to 5 M ohms
• Microwave Leakage Detection: 35 mW CM²
• Temperature Range: 14 to 122°F (-10 to +50°C)
• Frequency Range: 50 to 500 Hz

Applications:

• Connection wiring check
• Ground check
• Capacitor
• Diode; Rectifier
• Transistor (NPN and PNP types)
• Ignition Check
• Bulb; relay coil; fuse; speaker
• Fault finding
• Locating broken wire
• Static radiation pick up (TV or monitor)

RADIATION CHECK: Detects static radiation (t.v.) and checks for leakage (microwaves):

• Place a cup of water in the microwave
• Set the oven to 1 minute on high AND TURN on
• Move the tester slowly around the door and in front of door
• LED lights up where microwave leakage is detected

Spec Summary:

AC Voltage Test:	Contact method from 70 to 250VAC Non-contact method from 70 to 600VAC
DC Voltage Test:	Up to 250VDC
Polarity Check:	1.5V to 36VDC
Continuity Check:	0 to 5M ohms
Microwave Leakage Detection:	5mW CM²
Temperature Range:	14 to 122°F (-10 to +50°C)
Frequency Range:	50 to 500Hz
Battery Replacement:	Type: 1.5V x 2 Alkaline or silver type
Battery Life:	Approximately 5 hrs of continuous operation