Ozone (O3) Monitor, Wall Mount - 0-.14 PPM - Eco Sensors
This Wall Mount Ozone Monitor is intended for general monitoring and ozone control!
Item #: 32369
Manufacturer: Eco Sensors Incorporated
Manufacturer Item #: C-30ZX
Your Price $584.00
| Qty: | 1-2 | 3+ |
|---|---|---|
| Price: | $584.00 | $526.99 |
Details
Features & Applications:
This Wall Mount Ozone Monitor is a simple and inexpensive monitor capable of identifying ozone anywhere exposure is possible. It is ideally used around water treatment plants, photocopiers, laser printers, pulp bleaching mills, indoor air quality systems, HVAC and research labs.
This Ozone Monitor constantly monitors your work environment showing the ozone concentration by a multi-color graphical display. An alarm will sound when there is a detection of enough ozone to pose a serious health hazard. This user friendly device has virtually no maintenance, which even the most non-technical person can function. The monitor has the ability to measure .02-.14 ppm of ozone on its LED bargraph scale for quick recognition. When the monitor measures .05 ppm of ozone it turns yellow (caution), and at .1 ppm it turns red (danger), and the audio alarm sounds off alerting the user there are high levels of ozone present.
Features:
- Multi-color graphical display
- LED readout changes color as ozone level increases
- Audio alarm
- For general monitoring and ozone control
Spec Summary:
| Dimensions: | 3-1/4 x 2-3/8 x 1-3/8in. (85 x 35 x 60 mm) |
| Weight: | 5 oz. (140 grams) |
| Sensitivity to ozone: | .02-.14 ppm of ozone (LED scale); .02-.30 ppm via external data readout |
| Bargraph Display: | Normally green; yellow at .05 ppm (caution); red at .1 ppm (danger) |
| Response Time: | Within tenths of seconds of ozone reaching the sensor |
| Accuracy: | 10-20% depending on the conditions |
| Measurement Principle: | HMOS (heated metal oxide semiconductor) sensor |
| Power Requirements: | 12 VDC at 300 mA. AC adapters available worldwide. |
| Outputs: | LED bargraph, audio alarm, 0-3 V analog output such as for data loggers, and external alarm relay contacts; alarm actuation and relay contact closure at .1 ppm (standard) and is programmable. |
