RKI Air Quality Monitor Fixed System, Beacon 110 w/ Battery Charger
Shipping date will vary by manufacturer and item.
RKI's Air Quality Monitor Fixed System is the industry's best value single gas detection controller!
Item #: 135861
Manufacturer: RKI Instruments
Manufacturer Item #: 72-2110RK-01
Your Price $1,012.00
Features & Applications:
The Beacon 110 Air Quality Monitor provides one point of gas detection and is priced to be the industry’s best value single gas detection controller. It is compatible with RKI sensors for the detection of LEL level combustibles, Oxygen, Hydrogen Sulfide, or Carbon Monoxide. The Beacon 110 Gas Monitor can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Sensors can be mounted directly at the Beacon 110 housing, or can be wired remote from the controller.
The Beacon 110 is housed in a NEMA 4X rated case that provides a weather tight seal. The unit's case design complies with lock out/tag out standards and can be fully secured. An external reset switch allows the alarm to be silenced from outside of the controller housing. The Beacon 110 Gas Monitor ships complete with a wall mounting kit for easy installation.
Features:
- Low cost versatile solution
- Compact, weatherproof, NEMA 4X enclosure
- 115/220 VAC or 24 VDC operation
- Long life sensors (2+ years typical)
- Accepts RKI LEL/O2/H2S/CO direct connect sensors
- Accepts any 4-20 mA transmitter
- Audible alarm with reset button
- Two programmable alarm levels
- Built-in trouble alarm with relay
- Relay rating 10 amps, form C
- Provides 4-20 mA output
Applications:
- Petrochemical plants
- Refineries
- Water & wastewater treatment pants
- Pulp & paper mills
- Gas, telephone, & electric utilities
- Parking garages
- Manufacturing facilities
- Steel
- Automotive
- HVAC
Sensors not included!
Spec Summary:
Physical |
|
Dimensions: |
Height: 8.5" 216 mm Width 7.0" 178 mm Depth 4.3" 109 mm |
Enclosure: |
Wall mounting grey polycarbonate with hinged cover |
Conduit: |
3/4" NPT conduit hubs, 2 provided |
Connection: |
1 for sensor wiring 1 for power & relay wiring |
Wiring Termination: |
Screw type terminal block 14 gauge max |
Power: |
Universal 115 VAC & 220 VAC, or 24 VDC nominal, battery backup option available |
Controls: |
3 internal push buttons for setup, programming, and calibration. 1 external push button for alarm reset |
Environmental |
|
Operating Temp: |
14 to 122°F (-20 to 50°C) |
Storage Temp: |
-4 to 158°F (-20 to 70°C) |
Relative Humidity: |
0 - 100% RH |
Enclosure Rating: |
NEMA-4X enclosure, waterproof, chemical, and weather resistant |
Inputs |
|
Direct Wired: |
LEL |
Sensors: |
Oxygen Carbon Monoxide Hydrogen Sulfide Remote amp not required for less than 500 feet |
4-20 mA Sensors: |
Accepts any 4-20 mA transmitter (24 VDC, 2 or 3 wire). A wide variety of RKI/Riken sensors are available with 4-20 mA signals. (See list of detectable gases.) Wiring distances up to 5000 feet |
Sampling Methods: |
Diffusion and sample draw heads available |
Outputs |
|
Relays: |
3 relays - 10 amp rating (at 115 VAC), SPDT isolated contacts. 2 relays for gas alarms and 1 trouble relay. Relays fully programmable for: increasing or decreasing alarm, latching or self reset, normally energized or normally de-energized, time delay for alarm on and alarm off |
4-20 mA: |
Signal output, 4-20 mA (maximum load impedance 500 ohms), per channel |
24 VDC: |
24 VDC (400 mA max) output provided to operate sample drawing adapters or other accessories |
Display: |
2 x 8 Alphanumeric display with backlighting |
Audible: |
Built-in audible alarm, 94 dB, mounted on enclosure Coded output: pulsing = gas alarm, steady = fail |
Visual: |
3 LED’s on the front cover for alarm status indication, and malfunction |
Warranty: |
One year materials and workmanship |
Partial List Of Detectable Gases:
Ammonia (NH3) |
0 - 75.0 ppm |
| Arsine (AsH3 ) | 0 - 0.20 ppm |
| Boron Trichloride (BCl3) | 0 - 15.0 ppm |
| Carbon Dioxide (CO2) | 0 - 1.0 % |
| Carbon Monoxide (CO) | 0 - 300 ppm |
| Chlorine (Cl2) | 0 - 3.0 ppm |
| Chlorine Dioxide (ClO2) | 0 - 1.00 ppm |
| Chlorine Trifluoride (ClF3) | 0 - 1.00 ppm |
| Combustibles | 0 -100% LEL |
| Diborane (B2H6) | 0 - 30.0 ppm |
| Fluorine (F2) | 0 - 6.0 ppm |
| Hydrogen (H2) | 0 - 2000 ppm |
| Hydrogen Chloride (HCl) | 0 - 15.0 ppm |
| Hydrogen Fluoride (HF) | 0 - 9.0 ppm |
| Hydrogen Sulfide (H2S) | 0 -100.0 ppm |
| Nitric Oxide (NO) | 0 -100.0 ppm |
| Nitrogen Dioxide (NO2) | 0 - 15.0 ppm |
| Nitrogen Trifluoride (NF3) | 0 - 30.0 ppm |
| Oxygen (O2) | 0 - 25.0 % |
| Ozone (O3) | 0 - 1.0 ppm |
| Phosphine (PH3) | 0 - 1.0 ppm |
| Silane (SiH4) | 0 - 15.0 ppm |
| Sulfur Dioxide (SO2) | 0 - 30.0 ppm |
| TEOS (Si(OC2H5)4) | 0 -15/30 ppm |
| Product Description: | Price: | Your Cart: | |
|---|---|---|---|
 |
LEL Sensor | $295.00 | Add |
|
O2 Sensor | $295.00 | Add |
|
H2S Sensor | $421.00 | Add |
|
CO Sensor | $409.00 | Add |
