Solinst® Temperature / Water Level / Conductivity (TLC) Meter, Model 107™ - 30 m. L Tape
This product is expected to ship after 06/06/2012.
This Solinst® TLC meter gives you precise readings of conductivity and temperature on an LCD that rotates for reading convenience
Item #: 125088
Manufacturer: Solinst Canada Ltd
Manufacturer Item #: 107445
Your Price $1,160.00
Features & Applications:
For accurate, reliable profiling of conductivity and temperature in wells and open water, the TLC Meter is the ideal tool. This meter is a state of the art tool but very easy to use. View the full details below.
Conductivity Made Easy:
- Accuracy is to the greater of 30 µS or 2% of reading
- Rugged Solinst reel and accurate tape
- Probe dia. is 3/4" (19 mm)
- Display that rotates for easy reading
- Standard 9V alkaline battery gives 90 hrs. of use
- Auto-Off after 8 minutes
Applications:
- Profiling conductivity and temperature in wells and open water
- Salinity studies
- Saltwater intrusion investigations
- Testing for water quality impairments from road salt
- Tracer tests
- General indication of chemical contamination level
- Early warning of changes in water quality at: Landfills and Industrial Sites
Conductivity Measurements:
The TLC Meter uses a 'smart’ conductivity sensor with platinum electrodes to read conductivity from 0 – 80,000 µS. The conductivity is displayed on the rotating screen along with the associated temperature measurement. The 'smart’ conductivity probe displays conductivity automatically standardized to 25°C, i.e. specific conductance. The conductance temperature coefficient is 2.0% per °C. Calibration is simple, using 1413 µS and 80,000 µS solutions for single or two point conductivity calibration.
Temperature Measurments:
The TLC Meter operates in a range from –15°C to +50°C (23°F to 122°F). You may choose to have the readings displayed on the LCD screen in °C or °F. Accuracy is +/- 0.3°C in Celsius, or +/-0.5°F in Fahrenheit. Conductivity measurements are temperature sensitive. The 'smart’ TLC probe automatically adjusts the measured conductivity values to display as specific conductance. This provides standardized repeatably comparable measurements. When the probe is turned on, the LCD screen displays both conductivity and temperature. A short wait of 20 seconds per degree Celsius of temperature change is required for the measurements to stabilize at each desired depth, before recording the three measurements.
Level and Depth Measurements:
When the zero point of the probe enters water, an electric circuit is completed, briefly activating a buzzer and blanking out the screen for about 1 second. The depth to water is then read off the tape. When the TLC Meter is withdrawn from the water, a short buzz gives a warning that the probe is now out of water. A Tape Guide/Datum allows the depth measurement to be read at the marked position on the Tape Guide, to give reliable, repeatable, accurate depth measurements when profiling a well. The Tape Guide protects the tape from damage on rough edges of well casing.
High Quality Tape:
The high quality polyethylene tape reels smoothly, remains flexible and hangs straight in the well, irrespective of temperature. The tape is mounted on a sturdy, well-balanced Solinst reel, with a convenient battery drawer for the 9 Volt alkaline battery. Permanent markings each 1/100 ft. or millimeter allow accurate readings. Stranded stainless steel conductors resist corrosion, provide strength and are non-stretch. They make the tape very easy to repair and splice. The dog-bone design reduces adherence to wet surfaces.
Other versions of Solinst® Temperature / Water Level / Conductivity (TLC) Meter, Model 107™ are also Available:
