TPI® 194 Digital Multimeter, Electrical Industrial
In stock! Usually ships within 1 business day.
With its triple display, this TPI Digital Multimeter allows you to view more than one reading at a time!
Item #: 148386
Manufacturer: Test Products International
Manufacturer Item #: 194
Your Price $259.95
Features & Applications:
The TPI 194 Digital Multimeter has a large 50,000 count display. True RMS DMMs accurately measures nonsinusoidal AC voltage and current waveforms found on controls and circuits.
Features:
- Large 50,000 count display increases resolution and improves accuracy (1.7" x 2.75", 43mm x 70mm)
- Triple Display shows more than one reading simultaneously
- 51 Segment Analog Bar Graph to catch fast AC fluctuations
- Back Light (LED Type) allows viewing in any light condition
- Auto Range automatically selects the best range for the measurement
- Separate battery and fuse compartment for easy replacement
- True RMS needed to accurately measure nonsinusoidal AC voltage and current waveforms found on controls and circuits
- Increased safety with Silicone rubber 1,000V CAT III, 600V CAT IV, 10A test leads (CE & cUL listed)
- Auto Power Off DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off: Hold down the REC button and turn the meter on.
- Diode Test displays approximate forward bias voltage
- Continuity and buzzer to check for opens and shorts
- Included accessories:
- A190 : Protective Boot
- A085 : UL Listed Silicone Test Lead Set with Alligator Clips (Screw On)
- A104 : 0.5 Amp/600V UL Ceramic Fuse for 100 series DMMs (2 each)
- A110 : 10 Amp/600V UL Ceramic Fuse for 100 series DMMs (2 each)
Spec Summary:
| Basic DC accuracy: | 0.05% |
| Compare: | Compares stored value with measured value for matching components |
| Data Hold: | Enables the reading on the display to be frozen. The two hold system holds the previous reading when a new one is received |
| Relative: | Display a measured value as a percentage of a stored value. Useful for component testing. |
| Record: | Record Minimum, Maximum, and average reading |
| Auto Range: | Automatically selects the best range for measurement |
| Continuity & Buzzer: | Check for opens and shorts |
| RS232: | Optically isolated software optional |
| Safety: | Designed to meet cULus 3111 and IEC1010 |
| LCD: | Large 50,000 count display |
| Triple Display: | Shows more than one reading simultaneously |
| Bar Graph: | 51 Segments Analog Bar Graph to catch fast AC fluctuations |
| Back Light: | Allows viewing in any light condition |
| True RMS: | Needed to accurately measure ninsinusoidal AC voltage and current waveforms found on controls and circuits |
| Test Leads: | Silicone rubber 1,000 CAT III, 600V CAT IV, 10A |
| Auto Power Off: | DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off: Hold down the REC button and turn the meter on |
| Diode Test: | Displays approximate forward bias voltage |
| General Specifications | |
| Weight: | 1.16 lb. (530g) |
| Operating Temp: | -32 to 113°F (0 to 45°C) |
| Storage Temp: | -40 to 140°F (-20 to 60°C) |
| Relative Humidity: | 0 to 80%: (32 to 95°F/0 to 35°C) |
| 0 to 70%: | (95 to 131°F/45 to 55°C) |
| Temp Coefficient: | 0.1x (Specified Accuracy) per °C for temperature <18°C to >28°C |
| Power Supply: | 9 Volt Alkaline Battery |
Digital Multimeter, Electrical Industrial - TPI® 194
Click the link(s) above to open the document(s) for this item. Should you wish to download it, right click on the link and select "Save Target As..." or "Save Link As...".
If you do not have Acrobat Reader, click here to download the latest version.
Click the link(s) above to open the document(s) for this item. Should you wish to download it, right click on the link and select "Save Target As..." or "Save Link As...".
If you do not have Acrobat Reader, click here to download the latest version.
