The ExStik™ Conductivity/TDS/Salinity Meter is a waterproof meter with one high accuracy multi-range sensor that measures four parameters.

With the EC400's dynamic cell-constant technology it is possible to measure a wide range of Conductivity, TDS, and Salinity with the same electrode. Careful use and maintenance will provide years of reliable service.

Features:

• Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution requiring a conductivity, TDS or Salinity measurements
• Units of measure include µS, mS, ppm, ppt, mg/L, and g/L
• High accuracy multi-range conductivity cell measures Conductivity, TDS, Salinity, and Temperature
• Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 -conveniently calculates the TDS value
• Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends
• Data Hold, Auto Power Off and low battery indication
• Automatic Temperature Compensation of 2% per °C
• Internal memory stores up to 15 labeled readings for easy recall
• Self calibration of electronics on power up
• Easy to replace Conductivity cell module
• Waterproof design to withstand wet environment
• Complete with meter and Conductivity cell, protective sensor cap, sample cup with cap, four SR44W button batteries, and 48"(1.2m) neckstrap

Spec Summary: