Features & Applications:
With the M•Cal Calibration Station, calibrating, bump testing and
charging the M40 Multi-Gas Monitor has never been easier or more cost-effective.
The M•Cal works with all M40 monitors that have software version 4.0 or higher in a diffusion mode or with an SP40
sampling pump attached. The M•Cal features simple, two button operation
allowing the user to quickly and easily calibrate or function (bump) test the
instrument, and the LED indicators display whether or not the instrument passed
or failed the desired function.
A PC is not required to operate this stand-alone system, making the unit
extremely portable and flexible.
Note: Sold in continental US only.
Features:
- M40/SP40 bay included
- Stand-alone operation
- No PC is required
- Calibration
- Function (bump) testing
- Battery Recharging
- Simple, two-button operation
Spec Summary:
|
Monitors Supported: |
M40 Software versions 4.0 and higher |
|
Configurations: |
• M40 only version
• M40/SP40 pump version |
|
Dimensions M•Cal401: |
4.03 x 6 x 7" (10.24 x
15.24 x 17.78 cm) |
|
Gas Inlets: |
One fresh air, one gas cylinder |
|
Pump Flow Rate: |
0.25 LPM |
|
Input: |
Universal power supply |
|
Communication: |
On-board LEDs give status indication
(pass, fail, charging). Real-time readings
on M40 display during calibration. |
|
Internal Memory: |
Stores up to 150 bump test and calibration
reports before overwrite.
Reports contain serial number, time, date, sensor information, pass/fail,
span values and bump values (for bump tests). Memory will retain
information when power is off. |
Note:
Air monitor not included
REQUIRES ADDITIONAL CALIBRATION EQUIPMENT, PLEASE CONTACT CUSTOMER SERVICE FOR DETAILS
