Features & Applications:
With the Cal Plus™ Calibration Station, calibrating and bump testing
the GasBadge® Plus Gas Monitor has never been easier or more cost-effective.
The Cal Plus features simple, two-button operation allowing the user to quickly
and easily calibrate or function (bump) test the instrument. The large LCD display
and LED indicators then show whether or not the instrument passed or failed
the desired function.
A PC is not required to operate this stand-alone system, making the unit extremely
portable and flexible. When used with a PC, Cal Plus software generates calibration
and bump test reports that are automatically downloaded via a standard USB connection.
The unit also downloads alarm events and instrument details to the PC, allowing
the user to quickly and easily configure instrument preferences.
The Cal Plus is also available with a built-in dot-matrix printer that automatically
prints calibration and bump test reports to provide permanent documentation
of instrument serial numbers, pass/fail indications, bump test readings and
full span readings for the GasBadge® Plus.
Note: Sold in continental US only.
Features:
- Automatic bump test and calibration
- Stand-alone operation – no PC is required
- Two-button operation
- LCD display
- Multi-lingual support
- LED indications
- Serial printer interface
- USB interface
- Internal memory
- Custom PC software
- User-adjustable calibration interval
Spec Summary:
Monitor Supported: |
GasBadge® Plus |
|
Configurations: |
Single unit
Single unit with internal printer |
|
Dimensions: |
3 x 9.3 x 7.6" single unit
(7.6 x 23.6 x 19.3 cm) |
Gas Inlets: |
One fresh air, one gas cylinder |
Pump Flow Rate: |
0.25 LPM |
Input: |
Universal power supply |
|
Communication: |
On-board LEDs give status indication
(pass, fail). Multilingual LCD display shows
Cal Plus™ status and set-up menus. Realtime
readings on GasBadge® Plus display
during calibration. |
|
Internal Memory: |
Stores up to 200 bump test and calibration
reports before overwrite. Reports
contain serial number, time, date, sensor
information, pass/fail, span values and
bump values (for bump tests). Memory will
retain information when power is off. |
ADDITIONAL CALIBRATION EQUIPMENT NEEDED. PLEASE CONTACT CUSTOMER SERVICE FOR DETAILS.
Note: Industrial Scientific products can only be sold in North America only.
