Printable Product Detail- 158965

PO Box 5197
Janesville, WI 53547-5197

Phone Number: 608-743-8002
Fax Number: 608-743-8039
Toll Free Number: 1-800-334-9291
Toll Free Fax Number: 1-888-776-3187

Fluke 355 AC/DC True-RMS Clamp Meter w/Continuity Beeper, 2000A
Item #: 158965
Manufacturer: Fluke Electronics
Manufacturer Item #: FLUKE-355 / 2840265
Your Price: $693.00
In Stock

The display hold feature on the Fluke 355 True-RMS Clamp Meter allows you to capture readings even when the display can't be viewed!

Features & Applications:

Confidently take reliable readings with the Fluke 355 True-RMS Clamp Meter. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. It also measures voltage and resistance, making this an ideal clamp meter for utilities, electrical contractors and industrial service technicians.

Features:

Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac and 2000 A dc
The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
CAT IV 600 V, CAT III 1000 V rating for added user protection
In-rush current measurement captures 'power-on’ surge current with accuracy and repeatability
High voltage measurement of 1000 V ac + dc true-rms, 600 V ac, and 1000 V dc allows the user to perform multiple tests with only one tool
Resistance to 400K ohms coupled with a continuity beeper provides the convenience of a multimeter in a clamp meter
Accurately measure frequency up to 1 kHz for optimum troubleshooting
Quickly analyze readings using the MIN, MAX, and AVG functions
A large backlit display allows for easy visibility in low-lit areas
Use the display hold feature to capture readings even when the display cannot be viewed
Use the low-pass filter to smooth out noisy loads and stabilize readings
Includes:
- 355 clamp meter
- C43 Soft carrying case
- 6 AA batteries
- TL224 1.5 m silicone rubber test leads
- TP2 Test Probes
- AC285 Alligator Clips
- User manual
- 3 year warranty

Spec Summary:

Electrical Specifications:
Current Measurement dc and ac 10 Hz to 100 Hz:	Range: 40 A	Resolution: 10 mA Accuracy, A: 1.5 % rdg + 15 digits Trigger Level for Inrush: 0.50 A Trigger Level for Hz Filter OFF: 2.50 A Trigger Level for Hz Filter ON: 0.50 A
	Range: 400 A	Resolution: 100 mA Accuracy, A: 1.5 % rdg + 5 digits Trigger Level for Inrush: 5.0 A Trigger Level for Hz Filter OFF: 2.5 A Trigger Level for Hz Filter ON: 2.5 A
	Range: 2000 A; 1400 ac rms	Resolution: 1 A Accuracy, A: 1.5 % rdg + 5 digits Trigger Level for Inrush: 5 A Trigger Level for Hz Filter OFF: 8 A Trigger Level for Hz Filter ON: 8 A
Crest Factor (50/60 Hz):	Range: 40 A	Crest Factor* : 2 @ 33 A, 2.4 @ 27 A
	Range: 400 A	Crest Factor* : 2 @ 330 A, 2.4 @ 270 A
	Range : 2000 A; 1400 ac rms	Crest Factor* : 2 @ 1000 A, 2.4 @ 833 A
Current Measurement ac 100.1 Hz to 1 kHz:	Range: 40 A	Resolution: 10 mA Accuracy > 10 A : 3.5 % rdg + 15 digits Trigger Level for Inrush: 0.50 A Trigger Level for Hz Filter OFF : 2.50 A Trigger Level for Hz Filter ON : 0.50 A
	Range: 400 A	Resolution: 100 mA Accuracy > 10 A : 3.5 % rdg + 5 digits Trigger Level for Inrush: 5.0 A Trigger Level for Hz Filter OFF : 2.5 A Trigger Level for Hz Filter ON : 2.5 A
	Range: 2000 A; 1400 ac rms	Resolution: 1 A Accuracy > 10 A : 3.5 % rdg + 5 digits Trigger Level for Inrush: 5 A Trigger Level for Hz Filter OFF : 8 A Trigger Level for Hz Filter ON : 8 A
Voltage measurement dc and ac 10 Hz to 100 Hz (600 V and 1000 V ranges have 10 % over range to 660 V and 1100 V respectively):	Range: 4 V	Resolution: 1 mV Accuracy: 1 % rdg + 10 digits Trigger Level for Hz Filter OFF: 0.050 V Trigger Level for Hz Filter ON: 0.050 V
	Range: 40 V	Resolution: 10 mV Accuracy: 1 % rdg + 5 digits Trigger Level for Hz Filter OFF: 0.25 V Trigger Level for Hz Filter ON: 0.25 V
	Range: 400 V	Resolution: 100 mV Accuracy: 1 % rdg + 5 digits Trigger Level for Hz Filter OFF: 6 V Trigger Level for Hz Filter ON: 6 V
	Range: 600 V ac rms	Resolution: 1 V Accuracy: 1 % rdg + 5 digits Trigger Level for Hz Filter OFF: 6 V Trigger Level for Hz Filter ON: 6 V
	Range: 1000 V dc	Resolution: 1 V Accuracy: 1 % rdg + 5 digits
Voltage measurement ac 100.1 Hz to 1 kHz (600 V and 1000 V ranges have 10 % over range to 660 V and 1100 V respectively):	Range: 4 V	Resolution: 1 mV Accuracy: 3 % rdg + 10 digits Trigger Level for Hz Filter OFF: 0.050 V Trigger Level for Hz Filter ON: 0.050 V
	Range: 40 V	Resolution: 10 mV Accuracy: 3 % rdg + 5 digits Trigger Level for Hz Filter OFF: 0.25 V Trigger Level for Hz Filter ON: 0.25 V
	Range: 400 V	Resolution: 100 mV Accuracy: 3 % rdg + 5 digits Trigger Level for Hz Filter OFF: 6 V Trigger Level for Hz Filter ON: 6 V
	Range: 600 V ac rms	Resolution: 1 V Accuracy: 3 % rdg + 5 digits Trigger Level for Hz Filter OFF: 6 V Trigger Level for Hz Filter ON: 6 V
Ohms Measurement:	Range: 400 Ω	Resolution: 0.1 Ω Accuracy: 1.5 % + 5 digits
	Range: 4 kΩ	Resolution: 1 Ω Accuracy: 1.5 % + 5 digits
	Range: 40 kΩ	Resolution: 10 Ω Accuracy: 1.5 % + 5 digits
	Range: 400 kΩ	Resolution: 100 Ω Accuracy: 1.5 % + 5 digits
Continuity Beeper:	On at ≤ 30 Ω Off at ≥ 100 Ω
Frequency Measurement:	Measurement Range Resolution:	5.0 Hz to 1 kHz 0.1 Hz (15 Hz to 399.9 Hz); 1 Hz (400 Hz to 1 kHz)
	Accuracy – 5.0 Hz to 100 Hz:	0.2 % + 2 counts
	Accuracy – 100.1 Hz to 1 kHz:	0.5 % + 5 counts
	Trigger level:	Refer to current and voltage tables

*Add 2 % to error spec for CF > 2

General Specifications:
Batteries:	Six 1.5 V AA NEDA 15 A or IEC LR6
Battery life (with typical usage, backlight off):	100 hours
Test leads:	Rated to 1000 V
Weight:	.814 kg (1.8 lb)
Jaw size:	58 mm (2.28 in)
Dimensions (LxWxD):	300 mm x 98 mm x 52 mm (12 in x 3.75 in x 2 in)
Safety rating:	IEC 61010-2-032, 600 V CAT IV, 1000 V CAT III

Environmental Specifications:
Operating Temperature:	32 °F to + 122 °F (0 °C to +50 °C)
Storage Temperature:	-4 °F to 140 °F (-20 °C to +60 °C)
Operating Humidity:	0 to 95% (non-condensing)
Operating Altitude:	2000 m
Storage Altitude:	10,000 m
IP Rating:	42 (indoor use only)
Drop Test Requirements:	1 m
EMI, RFI, EMC:	FCC part 15, IEC/EN 61326-1:1997 class B, IEC/EN 61326:1997 3V/m, performance criteria B, EN61325
Temperature Coefficients:	Current:	0.1 % of reading per °C outside 22 °C to 24 °C
	Voltage:	0.1 % of reading per °C outside 22 °C to 24 °C

Close Window