The RKI GX-2001 Multi-Gas Monitor simultaneously detects Oxygen and Combustible Gas at the touch of a button!
Features & Applications:
The RKI GX-2001 Multi-Gas Monitor is the smallest and most affordable 2-gas monitor in the world. Weighing only 6 ounces and about the size of a pager (2.8" H x 2.2" W x 1.1" D), the GX-2001 simultaneously monitors combustibles and oxygen. It is armed with standard features like autocalibration, datalogging, rechargeable Ni-MH batteries, a unique vibration alarm, STEL / TWA readings, peak hold and auto backlighting at alarm on a large LCD display, and it even tells the time. All of these controls and features are operated through 3 simple glow-in-the-dark buttons. The Ni-MH batteries will fully charge in 90 minutes.
The GX-2001 is also designed around the world’s smallest gas sensors. Utilizing catalytic combustion, electrochemical and galvanic sensor technologies, each miniaturized sensor is manufactured with the same high quality control that has made Riken sensors and instruments the most reliable and long lasting monitoring devices in the industry.
Features:
- Simultaneous detection of LEL and O2
- Smallest 2-gas monitor on the market
2.8” H x 2.2” W x 1.1” D, 6 oz
- Vibration alarm
- Alarm trend data
- Datalogging standard
- Autocalibration
- Ni-MH batteries recharge in 90 minutes
- Continuously operates for up to 18 hours
- Large LCD display screen
- Automatic backlighting at alarm
- High impact, RFI shielded body
- STEL and TWA readouts
- Peak hold readouts
- Continuously displays current time
- Intrinsically safe, CSA, C / US approved
- 2 year warranty
Spec Summary:
| Gas Detected: |
Combustible Gases (Methane cal standard) |
|
| Detection Principle: |
Catalytic combustion |
Galvanic cell |
| Detection Range (Increments): |
0~100% LEL (1% LEL) |
0~40.0% Vol. (0.1% Vol.) |
| Sampling Method: |
Diffusion sampling, attachable sample drawing pump (G112) and hand aspirator optional |
| Display: |
Digital LCD with 7 segments, auto backlight at alarm display automatically cycles every 3 seconds reading each gas, immediate reading for alarm condition |
| Preset Alarms (User Adjustable): |
- 1st alarm 10% LEL
- 2nd alarm 50% LEL
- Over alarm 100% LEL
|
- Low alarm 19.5%
- High alarm 23.5%
- Over alarm 40.0%
|
| Kinds of Alarms: |
Gas alarms: 2 increasing alarms, STEL, TWA, over scaleTrouble alarms: Sensor connection, low battery, circuit error, calibration range error |
| Display of Alarm: |
Gas alarm: Blinking LEDs, intermittent buzzer, blinking gas value, vibration
Trouble alarm: Blinking LEDs intermittent buzzer, display of error message |
| Special Functions: |
Manual back light LCD (Automatic at alarm)
STEL, TWA
Peak hold
Continuous display of current time
Autocalibration
Data logging (40 hours)
Alarm trend
Direct charging
|
| Operating Temp. & Humidity: |
-20°C~+40°C (-4 to 104°F), 0 to 85% RH, non-condensing |
| Response Time: |
Within 30 seconds (T90) |
| Continuous Operation: |
Up to 18 hours |
| Power Source: |
Direct charging Ni-MH battery pack, (2.4VDC) |
| Safety Design: |
CSA classified, "C/US", as Intrinsically Safe. Exia. Class I, Groups A, B, C, & D. Class I, Zone 0, Group IIC. Temperature Code T3C. |
| Dimensions & Weight: |
Approx. 72 (H) x 56 (W) x 27 (D) mm (2.8” H x 2.2” W x 1.1” D), approx. 140 g (6 ounces) |
| Case Material: |
Dust & weather resistant. RFI shielded high Impact plastic and stainless steel |
| Controls: |
Three glow in the dark buttons: POWER / MODE, DISP, AIR |
| Warranty: |
Two year material and workmanship |
| Required Accessories: |
Battery Charger or Datalogging / Charger Station with cable and software for datalogging |
|
