The easy-to-use RKI GX-2001 Multi-Gas Monitor features a large LCD display and a high impact, RFI shielded body!
Features & Applications:
The most affordable 3-gas monitor in the world, the RKI GX-2001 Multi-Gas Monitor is also the smallest, yet still contains many advanced features and utilizes high quality sensors that are designed with catalytic combustion, electrochemical and galvanic sensor technologies. Each of these amazing, miniaturized sensors is reliable and long lasting. The unit itself is powered by Ni-MH batteries that fully charge in 90 minutes.
The unit weighs only 6 ounces and is about the size of a pager, and simultaneously monitors oxygen, hydrogen sulfide, and combustibles. Features include auto calibration, datalogging, a unique vibration alarm, STEL / TWA readings, peak hold and a large, auto backlighting LCD display. Three simple glow-in-the-dark buttons make this remarkable monitor very easy to use.
A datalogging software program is also available for Windows 95, 98, ME.
Features:
- Simultaneous detection of O2, H2S, & LEL
- Smallest 3-gas monitor on the market
2.8” H x 2.2” W x 1.1” D, 6 oz
- Vibration alarm
- Alarm trend data
- Datalogging standard
- Autocalibration
- Ni-MH batteries recharge in 90 minutes
- Continuously operates for up to 18 hours
- Large LCD display screen
- Automatic backlighting at alarm
- High impact, RFI shielded body
- STEL and TWA readouts
- Peak hold readouts
- Continuously displays current time
- Intrinsically safe, CSA, C / US approved
- 2 year warranty
Spec Summary:
| Gas Detected: |
Combustible Gases (Methane cal standard) |
|
Hydrogen Sulfide (H2S)
|
| Detection Principle: |
Catalytic combustion |
Galvanic cell |
Electrochemical cell |
| Detection Range (Increments): |
0~100% LEL (1% LEL) |
0~40.0% Vol. (0.1% Vol.) |
0~100.0 ppm (0.5 ppm) |
| Sampling Method: |
Diffusion sampling, attachable sample drawing pump (G112) and hand aspirator optional |
| Display: |
Digital LCD with 7 segments, auto backlight at alarm display automatically cycles every 3 seconds reading each gas, immediate reading for alarm condition |
| Preset Alarms (User Adjustable): |
- 1st alarm 10% LEL
- 2nd alarm 50% LEL
- Over alarm 100% LEL
|
- Low alarm 19.5%
- High alarm 23.5%
- Over alarm 40.0%
|
- 1st alarm 10 ppm
- 2nd alarm 30 ppm
- TWA alarm 10 ppm
- STEL alarm 15 ppm
- Over alarm 100 ppm
|
| Kinds of Alarms: |
Gas alarms: 2 increasing alarms, STEL, TWA, over scaleTrouble alarms: Sensor connection, low battery, circuit error, calibration range error |
| Display of Alarm: |
Gas alarm: Blinking LEDs, intermittent buzzer, blinking gas value, vibration
Trouble alarm: Blinking LEDs intermittent buzzer, display of error message |
| Special Functions: |
Manual back light LCD (Automatic at alarm)
STEL, TWA
Peak hold
Continuous display of current time
Autocalibration
Data logging (40 hours)
Alarm trend
Direct charging
|
| Operating Temp. & Humidity: |
-20°C~+40°C (-4 to 104°F), 0 to 85% RH, non-condensing |
| Response Time: |
Within 30 seconds (T90) |
| Continuous Operation: |
Up to 18 hours |
| Power Source: |
Direct charging Ni-MH battery pack, (2.4VDC) |
| Safety Design: |
CSA classified, "C/US", as Intrinsically Safe. Exia. Class I, Groups A, B, C, & D. Class I, Zone 0, Group IIC. Temperature Code T3C. |
| Dimensions & Weight: |
Approx. 72 (H) x 56 (W) x 27 (D) mm (2.8” H x 2.2” W x 1.1” D), approx. 140 g (6 ounces) |
| Case Material: |
Dust & weather resistant. RFI shielded high Impact plastic and stainless steel |
| Controls: |
Three glow in the dark buttons: POWER / MODE, DISP, AIR |
| Warranty: |
Two year material and workmanship |
| Required Accessories: |
Battery Charger or Datalogging / Charger Station with cable and software for datalogging |
|
