This emergency exit sign is maintenance free no wiring, bulbs or batteries to replace
Features & Applications:
Using the latest advances in photoluminescent technology, this innovative, low-cost, eco-friendly exit sign absorbs and stores ambient light to provide an eco-friendly emergency signal during smoky conditions or a power failure. Easy to install, the exit sign requires no bulbs or batteries, and helps you save on energy costs. Reduce the risk of panic or injury during an evacuation with an immediately visible exit indicator, specially designed for new construction or retrofits. Compliance: UL 924 and C-UL U.S. listed.
Features:
- Requires no additional electricity to operate
- Reliability
- Non-toxic, non-radioactive
- Low-cost, easy installation
- Designed for surface, flag or ceiling mounting
- Can be used for both high-level and low-level applications
- Requires virtually no maintenance, periodic inspections, for 25+ years
- Thin, low profile construction
- Consistent, uniform illumination
- Visible at 50 feet in total blackout
- Saves on energy costs
- Listed to UL 924 through UL, ICC ES #6040 meeting all current building codes, meets NFPA
- Life Safety Code 101 and OSHA requirements
- CCMC Evaluation Report CCMC 13211R
Specifications:
| Size: |
8" x 15" x 1/4" |
| Letter Size: |
7/8" stroke with 7" height |
| Backround: |
Green |
| Illumination: |
High Visibility Green |
| Visibility: |
50 feet |
| Directional: |
Pop-out chevron arrows for easy direction selection |
| Construction: |
.035 steel and a plastic photoluminescent panel |
| Durability: |
Explosion-proof for areas requiring explosion-proof exit signage |
| Tests Passed: |
UL 924 Emergency Lighting and Power Equipment Listed through
UL; ICC ES # 6040; California State Fire Marshall listing
#6200-1617; 100; City of Los Angeles Research Report: RR 25531
(CSI #16530); Ontario Building Material Evaluation Commission
Authorization Report BMEC #03-12-291; CCMC 13211-R |
| Life Expectancy: |
25+ years |
| Power Requirements: |
NO additional electrical or mechanical source required |
| Installation: |
Surface, flag or ceiling mounted (hardware included). Before
installation it must be determined that there is a minimum of 54
lux of fluorescent, metal halide or mercury vapor light on the
face(s) of the sign at all times during building occupancy. |
| Applications: |
Both high-level and low-level |
|
