The RKI GX-2009 personal multi-gas monitor represents the latest evolution of gas detection technology
Features & Applications:
The RKI GX-2009 personal multi-gas monitor is the smallest and lightest gas monitor on the market today, and represents the latest evolution of gas detection technology with a wide range of features and design enhancements that deliver reliable, long-lasting monitoring.
Featuring dual audible alarm ports and alarm LED’s on 3 sides of the instrument, users are certain to be quickly alerted to dangerous conditions, and the waterproof and dustproof design with IP 67 rating, and impact resistant, RFI resistant rubber over-mold body ensures the ultimate protection.
The gas monitor also features a superior data logging system, a vibration alarm, auto calibration, calibration lock out or reminder control, STEL / TWA readings, peak hold, auto backlighting at alarm on a large LCD display. See the full list of features and specifications below.
Features:
- Smallest / Lightest 4 gas monitor on the market 2.7” H x 3” W x 1” D, 4.6 oz
- Dual audible alarm ports (95 db @ 30 cm)
- 3 visual alarm LED’s
- Vibration alarm
- IP-67 Waterproof/dustproof design
- Calibration lock out or reminder controls
- Large capacity data logging standard
- 8 alarm trends
- Log time range of 10 to 300 hours
- 100 calibration records
- 20 hours of operation (NiMH batteries)
- Large LCD display screen
- Automatic backlighting at alarm
- Impact resistant over-mold body, RFI shielded body
- STEL and TWA readouts
- Intrinsically safe, IECEx / ATEX approved (CSA, C/US pending)
Applications:
- Personal monitoring
- Confined spaces
- Refineries/petrochemical
- Utilities
- Hazardous material
- Water/wastewater
- Fire services
- Construction
Specification:
| Gas Detected: |
All Combustible Gases (Methane as standard)
|
Oxygen (O2)
|
Carbon Monoxide
(CO)
|
| Detection Principle: |
Catalytic combustion |
Galvanic cell |
Electrochemical cell |
| Detection Range: |
0~100% LEL |
0~40.0% Vol.
(0.1% Vol.) |
0~500 ppm (1 ppm) |
| Sampling Method: |
Diffusion sampling |
| Display: |
Digital LCD displays all four gases simultaneously, with auto backlight |
| Alarm Method: |
Gas alarms: 1st and 2nd (user adjustable),STEL, TWA and OVER
Trouble alarms: Sensor connection, low battery, low flow, circuit trouble and calibration error |
| Types of Alarms: |
Gas Alarm: 2 increasing alarms, STEL, TWA, overscale alarm
Trouble alarm: Sensor disconnection, wire disconnection, low battery, circuit error, calibration range error |
| Operating Temp. & Humidity: |
-4°F to 122°F (-20°C ~ +50°C), 0 to 95% RH, non-condensing (splash resistant) |
| Response Time: |
Within 30 seconds (T90) |
| Continuous Operation: |
20 hours after a 3 hour full charge (14 hours after 90 min charge) |
| Power Source: |
Direct charging NiMH batteries, set of 2 |
| Safety Design: |
IECEx zone 0 Ex ia IIC T4; ATEX II 1G Ex ia IIC T4; (CSA classified, “C/US”, as intrinsically safe. Class I, Division 1, Groups A, B, C, D pending) |
| Dimensions & Weight: |
2.7” H x 3” W x 1” D (Approx. 70 H x 75 W x 25 D mm), 4.6 ounces (approx. 130g) |
| Case Material: |
RFI shielded high impact over molded rubber. Dust and waterproof with IP-67 approval. |
| Controls: |
Two glow in the dark buttons: POWER / MODE, AIR |
Standard Accessories: |
Battery charger, Alligator clip, NiMH batteries (set of 2) |
|
