The RKI GX-2009 personal multi-gas monitor represents the latest evolution of gas detection technology
Features & Applications:
Now, one of the most reliable and long lasting monitoring devices in the industry is also the smallest and lightest gas monitor in the world. The RKI GX-2009 Personal Multi-Gas Monitor is easy to use with two button operation and features a vibration alarm, dual audible alarm ports, alarm LED’s on 3 sides of the instrument, auto calibration, calibration lock out or reminder control, STEL / TWA readings, peak hold, auto backlighting at alarm on a large LCD display.
The compact body features include a waterproof and dustproof design with IP 67 rating, and an impact resistant rubber over-mold body that is RFI resistant. The unit is powered by a NiMH battery set that will operate for 20 hours and will fully charge in 3 hours.
A huge capacity data logging function is a standard feature, and will store up to 8 alarm trend sessions where readings are recorded 30 minutes before and after an alarm event. The data logging has a 3,600 data point capacity with a log time range of 10 to 300 hours based on programmable interval times.
Features:
- Smallest / Lightest 4 gas monitor on the market 2.7” H x 3” W x 1” D, 4.6 oz
- Dual audible alarm ports (95 db @ 30 cm)
- 3 visual alarm LED’s
- Vibration alarm
- IP-67 Waterproof/dustproof design
- Calibration lock out or reminder controls
- Large capacity data logging standard
- 8 alarm trends
- Log time range of 10 to 300 hours
- 100 calibration records
- 20 hours of operation (NiMH batteries)
- Large LCD display screen
- Automatic backlighting at alarm
- Impact resistant over-mold body, RFI shielded body
- STEL and TWA readouts
- Intrinsically safe, IECEx / ATEX approved (CSA, C/US pending)
Applications:
- Personal monitoring
- Confined spaces
- Refineries/petrochemical
- Utilities
- Hazardous material
- Water/wastewater
- Fire services
- Construction
Specification:
| Gas Detected: |
All Combustible Gases (Methane as standard)
|
Oxygen (O2)
|
Hydrogen Sulfide
(H2S)
|
Carbon Monoxide
(CO)
|
| Detection Principle: |
Catalytic combustion |
Galvanic cell |
Electrochemical cell |
| Detection Range: |
0~100% LEL |
0~40.0% Vol.
(0.1% Vol.) |
0~100 ppm (0.5 ppm) |
0~500 ppm (1 ppm) |
| Sampling Method: |
Diffusion sampling |
| Display: |
Digital LCD displays all four gases simultaneously, with auto backlight |
| Alarm Method: |
Gas alarms: 1st and 2nd (user adjustable), STEL, TWA and OVER
Trouble alarms: Sensor connection, low battery, low flow, circuit trouble and calibration error |
| Types of Alarms: |
Gas Alarm: 2 increasing alarms, STEL, TWA, overscale alarm
Trouble alarm: Sensor disconnection, wire disconnection, low battery, circuit error, calibration range error |
| Operating Temp. & Humidity: |
-4°F to 122°F (-20°C ~ +50°C), 0 to 95% RH, non-condensing (splash resistant) |
| Response Time: |
Within 30 seconds (T90) |
| Continuous Operation: |
20 hours after a 3 hour full charge (14 hours after 90 min charge) |
| Power Source: |
Direct charging NiMH batteries, set of 2 |
| Safety Design: |
IECEx zone 0 Ex ia IIC T4; ATEX II 1G Ex ia IIC T4; (CSA classified, “C/US”, as intrinsically safe. Class I, Division 1, Groups A, B, C, D pending) |
| Dimensions & Weight: |
2.7” H x 3” W x 1” D (Approx. 70 H x 75 W x 25 D mm), 4.6 ounces (approx. 130g) |
| Case Material: |
RFI shielded high impact over molded rubber. Dust and waterproof with IP-67 approval. |
| Controls: |
Two glow in the dark buttons: POWER / MODE, AIR |
| Standard Accessories: |
Battery charger, Alligator clip, NiMH batteries (set of 2) |
|
