Features & Applications:

This Extech wireless non-contact AC circuit identifier combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology. It enables a single user to identify mid-run wires and to find the breaker that powers a circuit or light fixture without having to connect directly to the wires in the cable. Clamp-on unit will sense AC voltage of a mid-run wire and transmit the voltage present signal to the receiver indicator unit. The receiver indicator unit will indicate voltage present. When the user opens the splice or breaker, the voltage present indication stops, thereby identifying the AC wire. The external NCV probe can be used to identify wiring in hard-to-reach areas where the transmitting unit cannot fit.

Unique Two-part system:

• Wireless Transmitter with built-in non-contact AC voltage detector enables a single user to remotely identify a live mid-run cable. Unit clamps onto the cable and transmits a signal to the remote RT30 receiver/ indicator that voltage is present. Additionally, the built in light sensor can identify remote lighting circuits and transmit a signal to the Receiver/Indicator indicating that the light is on or off.
  
• Receiver indicates whether voltage or light has been detected from the remote Transmitter. When user opens breaker switch or splice, the Voltage/ Light indicator and audible tone turns off.

Identifies:

• Mid-run AC cables
  
• Circuit breakers connected to remote cables
  
• Switched branch circuits
  
• Individual light strings
  
• AC power outlets
  
• Using the clip-on NCV probe, identify AC cables in hard-to-reach areas. This probe is also used to clip-on to non-standard heavy gauge cables.

Features:

• Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology
• Remotely identifies mid-run AC wiring, circuit breakers, switched lines, AC outlets, and light fixtures
• Non-contact mid-run AC wiring identification without cutting into wires
• Lighting circuit identification using built-in light sensor
• Non-contact handheld voltage (NCV) detection
• External NCV probe can be used to identify wiring in hard-to-reach areas where the transmitting unit cannot fit
• AC Outlet Extender can be used to identify AC outlets
• Complete with transmitter, receiver, remote probe, 4 AAA batteries and case