This Hanna multiparameter water quality meter includes a long cable so you can drop the probe down 2"-dia. wells, off boats or off bridges
Features & Applications:
This Hanna multiparameter water quality meter features quick calibration, built-in barometer, measurement check, automatic recognition of pH/ORP probe and USB connectivity. Use it for on-demand or automatic logging of up to 60,000 samples with 13 measurements each. Logging interval can be set for one second to three hours. This rugged field meter includes a long cable so you can drop the probe down 2"-dia. wells, off boats or off bridges.
The iButton® tag identification system makes test logging easier. Just place a tag with a unique ID at a specific location. When you return to that location to take a measurement, just touch the meter to the tag and the meter will label all data with that location’s ID.
Includes probe, calibration solution, probe maintenance kit, four rechargeable NiMH batteries, power adaptor and cable, vehicle 12V outlet adaptor, five iButtons with holder, USB cable, Windows®-compatible software, instruction manual and carrying case.
Engineered with smart features such as auto recognition of pH/ORP probe, auto-ranging adjustments for EC/TDS readings, and measurement check - to eliminate erroneous readings - and more, our design actually simplifies operations and handling. There is virtually no learning curve to getting into this meter and quickly mastering it's capabilities. Each parameter is fully supported by the on-screen contextual help function, which is active during measurement and calibration modes. For field applications, Hanna's Quick Calibration allows the user to standardize pH, conductivity and dissolved oxygen, all with one solution! While in calibration mode, the meter will also assess and verify probe functionality. Comprehensive GLP features, such as last calibration date and status information, calibration time-out, and date and time tags associated with sample measurements, ensure consistency and accountability. The logger function memorizes data from each connected sensors and log-on-demand & automatic logging can record up to 60,000 data samples. All data is downloadable to a PC via USB connectivity.
HI 9828 is designed for demanding outdoor environments. The meter is impact resistant and waterproof to IP67 standards (30 minutes immersion under 1 m of water), and the multi-sensor probe, HI 769828, with an IP68 rating, can be left underwater for an extended period of time. This intelligent probe contains a built-in microprocessor with amplifiers, interprets the high impedance signals from each sensor and sends the converted data to the meter. Consequently, common tolerance issues associated with high impedance signals, such as limiting cable length, and noise interferences are eliminated. The probe maintains reliable communication with the meter, and the user is warned of any problems, such as a broken cable line.
Specifications:
| Range: |
pH |
0.00 to 14.00 pH |
| Resolution: |
pH |
0.01 pH |
| Accuracy: |
pH |
±0.02 pH |
| Range: |
mV |
±600.0 mV |
| Resolution: |
mV |
0.1 mV |
| Accuracy: |
mV |
±0.5 mV |
| Range: |
mV |
±2000.0 mV |
| Resolution: |
mV |
0.1 mV |
| Accuracy: |
mV |
±1.0 mV |
| Range: |
DO |
0.0 to 500.0%; 0.00 to 50.00 mg/L |
| Resolution: |
DO |
0.1% / 0.01 mg/L |
| Accuracy: |
DO |
0.0 to 300.0%: ±1.5% of reading or ±1.0% whichever is greater; 300.0 to 500.0%: ±3% of reading; 0.00 to 30.00 mg/L: ±1.5% of reading or 0.10 mg/L whichever is greater; 30.00 mg/L to 50.00 mg/L: ±3% of reading |
| Range: |
EC |
0.000 to 200.000 mS/cm (actual EC up to 400 mS/cm) |
| Resolution: |
EC |
Manual: 1 μS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm Automatic: 1 μS/cm from 0 to 9999 μS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm ; 0.1 mS/cm from 100.0 to 400.0 mS/cm Automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm |
| Accuracy: |
EC |
±1% of reading or ±1 μS/cm whichever is greater |
| Range: |
Resistivity |
0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm |
| Resolution: |
Resistivity |
Dependent on resistivity reading |
| Range: |
TDS |
0 to 400000 mg/L or ppm (the maximum value depends on the TDS factor) |
| Resolution: |
TDS |
Manual: 1 mg/L (ppm); 0.001 g/L (ppt); 0.01g/L (ppt); 0.1 g/L (ppt); 1 g/L (ppt) Auto-range scales: 1 mg/L (ppm) from 0 to 9999 mg/L (ppm); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt) Auto-range g/L (ppt) scales: 0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt) |
| Accuracy: |
TDS |
±1% of reading or ±1 mg/L |
| Range: |
Salinity |
0.00 to 70.00 PSU (extended Practical Salinity Scale) |
| Resolution: |
Salinity |
0.01 PSU |
| Accuracy: |
Salinity |
±2% of reading or 0.01 PSU whichever is greater |
| Range: |
Seawater Specific Gravity |
0.0 to 50.0 σt, σ0, σ15 |
| Resolution: |
Seawater Specific Gravity |
0.1 σt, σ0, σ15 |
| Accuracy: |
Seawater Specific Gravity |
±1 σt, σ0, σ15 |
| Range: |
Atm. Pressure |
450 to 850 mmHg; 17.72 to 33.46 inHg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa |
| Resolution: |
Atm. Pressure |
0.1 mmHg; 0.01 inHg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa |
| Accuracy: |
Atm. Pressure |
±3 mmHg within ±15°C from the temperature during calibration |
| Range: |
Temperature |
-5.00 to 55.00°C; 23.00 to 131.00°F; 268.15 to 328.15K |
| Resolution: |
Temperature |
0.01°C; 0.01°F; 0.01K |
| Accuracy: |
Temperature |
±0.15°C; ±0.27°F; ±0.15K |
| Calibration: |
pH |
Automatic 1, 2, or 3 points with 5 memorized standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or 1 custom buffer |
| Calibration: |
mV |
Automatic at 1 custom point |
| Calibration: |
Conductivity, Salinity |
Automatic 1 point with 6 memorized standards (84 μS/cm, 1413 μS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point |
| Calibration: |
DO |
Automatic 1 or 2 points at 0, 100% or 1 custom point |
| Calibration: |
Resistivity, TDS |
Based on conductivity or salinity calibration |
| Calibration: |
Atm. Pressure |
Automatic at 1 custom point |
| Calibration: |
Temperature |
Automatic at 1 custom point |
| Temperature Compensation: |
|
Automatic from -5 to 55°C (23 to 131°F) |
| Logging Memory: |
|
Up to 60000 samples with 13 measurements each |
| Logging Interval: |
|
1 second to 3 hours |
| PC Connection: |
|
USB (with HI 92000 software) |
| Waterproof Protection: |
|
Meter IP67, Probe IP68 |
| Environment: |
|
0 to 50°C (32 to 122°F); RH 100% |
| Power Supply: |
|
(4) 1.5V alkaline C cells (approx. 150 hours of continuous use without backlight)/ (4) 1.2V rechargeable C cells (approx. 70 hours of continuous use without backlight) |
| Dimensions: |
|
Meter: 221 x 115 x 55 mm (8.7 x 4.5 x 2.2”); Probe: 270 x 46 mm DIA (10.6 x 1.8” DIA) |
| Weight: |
|
Meter: 750g (26.5 oz.); Probe: 750g (26.5 oz.) |
|
