This Hanna multiparameter GPS enabled water quality meter can be used for automatic logging of up to 60,000 samples with 13 measurements each, and comes equipped with a probe, calibration solution, probe maintenance kit, four rechargeable NiMH batteries, power adaptor and cable, vehicle 12V outlet adaptor, five iButtons with holder, USB cable, Windows®-compatible software, instruction manual and carrying case.
The meter has a large host of features that make put it at the top of its class, including quick calibration, a built-in barometer, measurement check, automatic recognition of pH/ORP probe, USB connectivity, GPS mapping software with a built-in 12 channel GPS receiver and antenna, and HANNA’s exclusive Fast Tracker™-Tag I.D. System, plus more. View the full list of features and details below.
The new HI 9828 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m) so you can be sure that you return to the same location for repeated measurements.
Users can connect to GPS tracking software such as Google™ Maps to view locations where samples have been taken. Measurement information is shown right on the map.
HANNA’s iButton® Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user-entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.
| Range: |
pH |
0.00 to 14.00 pH |
| Resolution: |
pH |
0.01 pH |
| Accuracy: |
pH |
±0.02 pH |
| Range: |
mV of pH input |
±600.0 mV |
| Resolution: |
mV of pH input |
0.1 mV |
| Accuracy: |
mV of pH input |
±0.5 mV |
| Range: |
ORP |
±2000.0 mV |
| Resolution: |
ORP |
0.1 mV |
| Accuracy: |
ORP |
±1.0 mV |
| Range: |
Dissolved Oxygen |
0.0 to 500.0% / 0.00 to 50.00 mg/L |
| Resolution: |
Dissolved Oxygen |
0.1% / 0.01 mg/L |
| Accuracy: |
Dissolved Oxygen |
0.0 to 300.0%: ±1.5% of reading or ±1.0% whichever is greater; 300.0 to 500.0%: ±3% of reading; 0.00 to 30.00 mg/L: ±1.5% of reading or 0.10 mg/L whichever is greater; 30.00 mg/L to 50.00 mg/L: ±3% of reading |
| Range: |
Conductivity |
0.000 to 200.000 mS/cm (absolute EC up to 400 mS/cm) |
| Resolution: |
Conductivity |
Manual: 1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm; Automatic: 1 µS/cm from 0 to 9999 µS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm ; 0.1 mS/cm from 100.0 to 400.0 mS/cm; Automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm |
| Accuracy: |
Conductivity |
±1% of reading or ±1 µS/cm whichever is greater |
| Range: |
Resistivity |
0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm |
| Resolution: |
Resistivity |
Dependent on resistivity reading |
| Range: |
TDS |
0 to 400000 mg/L or ppm (the maximum value depends on the TDS factor) |
| Resolution: |
TDS |
Manual: 1 mg/L (ppm); 0.001 g/L (ppt); 0.01g/L (ppt); 0.1 g/L (ppt); 1 g/L (ppt); Auto-range scales: 1 mg/L (ppm) from 0 to 9999 mg/L (ppm); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt); Auto-range g/L (ppt) scales: 0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt) |
| Accuracy: |
TDS |
±1% of reading or ±1 mg/L |
| Range: |
Salinity |
0.00 to 70.00 PSU (Extended Practical Salinity Scale) |
| Resolution: |
Salinity |
0.01 PSU |
| Accuracy: |
Salinity |
±2% of reading or 0.01 PSU whichever is greater |
| Range: |
Seawater Specific Gravity |
0.0 to 50.0 σt, σ0, σ15 |
| Resolution: |
Seawater Specific Gravity |
0.1 σt, σ0, σ15 |
| Accuracy: |
Seawater Specific Gravity |
±1 σt, σ0, σ15 |
| Range: |
Atm. Pressure |
450 to 850 mmHg; 17.72 to 33.46 inHg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa |
| Resolution: |
Atm. Pressure |
0.1 mmHg; 0.01 inHg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa |
| Accuracy: |
Atm. Pressure |
±3 mmHg within ±15°C from the temperature during calibration |
| Range: |
Temperature |
-5.00 to 55.00°C; 23.00 to 131.00°F; 268.15 to 328.15K |
| Resolution: |
Temperature |
0.01°C; 0.01°F; 0.01K |
| Accuracy: |
Temperature |
±0.15°C; ±0.27°F; ±0.15K |
| Calibration: |
pH |
Automatic 1, 2, or 3 points with 5 memorized standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or 1 custom buffer |
| Calibration: |
ORP |
Automatic at 1 custom point |
| Calibration: |
Conductivity, Salinity |
Automatic 1 point with 6 memorized standards (84 μS/cm, 1413 μS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point |
| Calibration: |
Dissolved Oxygen |
Automatic 1 or 2 points at 0, 100% or 1 custom point |
| Calibration: |
Resistivity, TDS |
Based on conductivity or salinity calibration |
| Calibration: |
Atm. Pressure |
Automatic at 1 custom point |
| Calibration: |
Temperature |
Automatic at 1 custom point |
| Temperature Compensation: |
|
Automatic from -5 to 55°C (23 to 131°F) |
| Logging Memory: |
|
Up to 60000 samples with 13 measurements each Up to 45,000 samples with 15 measurements each (GPS) |
| Logging Interval: |
|
1 second to 3 hours |
| Computer Interface: |
|
USB (with HI 929828 software) |
| Waterproof Protection: |
|
Meter IP67, Probe IP68 |
| Environment: |
|
0 to 50°C (32 to 122°F); RH 100% |
| Power Supply: |
|
(4) 1.5V alkaline C cells (approx. 150 hours of continuous use without backlight) /(4) 1.2V rechargeable C cells (approx. 70 hours of continuous use without backlight) |
| Dimensions Meter: |
|
221 x 115 x 55 mm (8.7 x 4.5 x 2.2”) |
| Dimensions Probe: |
|
270 x 46 mm DIA (10.6 x 1.8"DIA) |
| Weight: |
|
Meter: 750g (26.5 oz.); Probe: 750g (26.5 oz.) |
