Professional Equipment     Print Page
PO Box 5197
Janesville, WI 53547-5197

Phone Number: 608-743-8002
Fax Number: 608-743-8039
Toll Free Number: 1-800-334-9291
Toll Free Fax Number: 1-888-776-3187


Hanna Waterproof Multiparameter Water Quality Meter - Low Range

 Hanna Waterproof Multiparameter Water Quality Meter - Low Range
Item #: 57565
Manufacturer: Hanna Instruments Incorporated
Manufacturer Item #: HI991300
Your Price: $509.95
 In Stock
This Hanna waterproof multiparameter water quality meter has a housing that is rated for IP 67 conditions

Features & Applications:

This Hanna waterproof multiparameter water quality meter can be used to test pH, conductivity (EC), Total Dissolved Solids (TDS) and temperature, all with a single probe. The unit is equipped with an easy two-button control, and designed with new technology that uses gel electrolyte and a cloth junction for the pH sensor, and graphite for the EC/TDS sensor. This serves to eliminate oxidation and polarization errors. The meter features auto-calibration and auto-temperature compensation, and is built with a waterproof housing rated for IP 67 conditions. It can operate for up to 500 hours on the included four 1.5V batteries. It comes a probe and a hard carrying case. View the full specifications below.

Specifications:
Range: pH 0.00 to 14.00 pH
Range: EC 0 to 3999 µS/cm
Range: TDS 0 to 2000 ppm (mg/L)
Range: Temperature 0.0 to 60.0°C (32.0 to 140.0°F)
Resolution: pH 0.01 pH
Resolution: EC 1 µS/cm
Resolution: TDS 1 ppm
Resolution: Temperature 0.1°C (0.1°F)
Accuracy: pH ±0.01 pH
Accuracy: EC ±2% F.S.
Accuracy: TDS ±2% F.S.
Accuracy: Temperature ±0.5°C (±1.0°F)
TDS Conversion Factor: selectable 0.45 to 1.00 with 0.01 increments (default 0.50)
pH Calibration: automatic at 1 or 2 points with 2 sets of memorized standard (pH 4.01/7.01/10.01 or 4.01/6.86/9.18)
EC/TDS Calibration: automatic, 1 point at 1382 ppm (CONV 0.5)
at 1500 ppm (CONV 0.7) at 1413 µS/cm (others)
Temperature Compensation:: pH Automatic
Temperature Compensation: EC/TDS Automatic with selectable ß from 0.0 to 2.4%/°C with 0.1 increments
Probe: HI 1288, pH/EC/TDS/T, DIN connector, 1 m (3.3') cable (included)
Battery Type / Life: 4 x 1.5V AAA / approx. 500 hours of continuous use
Environment: 0 to 50°C (32 to 122°F); RH max 100%
Dimensions: 150 x 80 x 36 mm (5.9 x 3.1 x 1.4")
Weight: 210 g (7.4 oz.)

Close Window