Professional Equipment     Print Page
PO Box 5197
Janesville, WI 53547-5197

Phone Number: 608-743-8002
Fax Number: 608-743-8039
Toll Free Number: 1-800-334-9291
Toll Free Fax Number: 1-888-776-3187


Fieldpiece Carbon Monoxide Accessory Head

 Fieldpiece Carbon Monoxide Accessory Head
Item #: E402-ACM3
Manufacturer: Fieldpiece
Manufacturer Item #: ACM3
Product Type: Gas Detector Accessories
Your Price: $200.95
The Fieldpiece Carbon Monoxide Accessory Head measures CO in air and finds CO sources
Features & Applications:

The Fieldpiece Carbon Monoxide Accessory Head enables most digital multimeters to measure low levels of carbon monoxide in parts per million (PPM). It is intended to measure levels of CO in still ambient air. In many cases, it can pinpoint sources of CO. It uses a catalytic chemical sensor that consumes no chemicals. The most pratical application is to determine if the indoor CO levels are higher than outdooor levels and to determine the source.

The Fieldpiece Carbon Monoxide Accessory Head is required to be used with the Electronic Handle (#E402-EHDL1).

Features:

  • Fast enough to locate CO source in “walk-around” test
  • Three pin sensor for better performance
  • Long battery life
  • Auto-off can be disabled for data logging
  • Select averaging or normal for smoothing or fast response to change
  • Rugged mechanical design
  • Standard 9V battery

Spec Summary:

Range:

 0 to 1000PPM (2000PPM with
5 minute max exposure time).

Initial accuracy:

 0-15ppm ±5% reading
±1 ppm after zeroing;
15-35ppm ±5% reading ±2 ppm after zeroing;
0-1000ppm ±5% reading ±5 ppm after zeroing.

Response time:

 <70sec to 90% of reading.

Operating temperature:

 32 to 105ºF

Sensor type:

 Electrochemical (specific to CO)

Power:

 Single standard 9-volt battery

Battery Life:

 200 hours

Close Window