Features & Applications:

The ExStik™ Conductivity/TDS/Salinity Meter has a high-accuracy multi-range sensor measures four parameters, including conductivity, TDS, salinity and temperature. Simultaneous display of conductivity or TDS plus temperature. Includes adjustable conductivity to TDS ratio factor from 0.4–1.0. Autoranging with eight selectable units: μS, mS, ppm, ppt, mg/L, g/L, °C and °F.

Features:

• Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution requiring a conductivity, TDS or Salinity measurements
• Units of measure include µS, mS, ppm, ppt, mg/L, and g/L
• High accuracy multi-range conductivity cell measures Conductivity, TDS, Salinity, and Temperature
• Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 -conveniently calculates the TDS value
• Large 3-1/2 digit (2000 count) Digital display with analog bargraph to indicate sample trends
• Data Hold, Auto Power Off and low battery indication
• Automatic Temperature Compensation of 2% per °C
• Internal memory stores up to 15 labeled readings for easy recall
• Self calibration of electronics on power up
• Easy to replace Conductivity cell module
• Waterproof design to withstand wet environment
• Complete with meter and Conductivity cell, protective sensor cap, sample cup with cap, four SR44W button batteries, and 48"(1.2m) neckstrap

Spec Summary:

Conductivity:	Ranges: 0 to 199.9µS 200 to 1999µS 2.00 to 19.99mS
	Max. Resolution: 0.1µS 1µS 0.01mS
	Basic Accuracy: ±2% FS
TDS:	Ranges: 0 to 99.9ppm (mg/L) 100 to 999ppm (mg/L) 1.00 to 9.99ppt (g/L)
	Max. Resolution: 0.1ppm (mg/L) 1ppm (mg/L) 0.01ppt (g/L)
	Basic Accuracy: ±2% FS
Salinity:	Ranges: 0 to 99.9ppm (mg/L) 100 to 999ppm (mg/L) 1.00 to 9.99ppt (g/L)
	Max Resolution: 0.1ppm (mg/L) 1ppm (mg/L) 0.01ppt (g/L)
Temperature:	Ranges: 32° to 149°F (-5 to 65°C)
	Max. Resolution: 0.1°
	Basic Accuracy: ±1.8°F/1°C
Power:	Four SR44W button batteries
Dimensions:	1.4" x 6.8" x1.6" (36 x 173 x 41mm)
Weight:	3.8oz (110g)