Features & Applications:

This M-Cal Calibration Station is a portable, easy to use instrument that can calibrate, bump test and charge the M40 Multi-Gas Monitor without the use of a PC or other equipment. The M-Cal is compatible with all M40 monitors that have software version 4.0 or higher in a diffusion mode or with an SP40 sampling pump attached. The M-Cal features LED indicators that display whether or not the instrument has passed or failed the desired function.

Note: Sold in continental US only.

Features:

• M40/SP40 bay included
• Stand-alone operation
• No PC is required
• Calibration
• Function (bump) testing
• Battery Recharging
• Simple, two-button operation

Spec Summary:

Monitors Supported:	M40 Software versions 4.0 and higher
Configurations:	• M40 only version • M40/SP40 pump version
Dimensions M•Cal401:	4.03 x 6 x 7" (10.24 x 15.24 x 17.78 cm)
Gas Inlets:	One fresh air, one gas cylinder
Pump Flow Rate:	0.25 LPM
Input:	Universal power supply
Communication:	On-board LEDs give status indication (pass, fail, charging). Real-time readings on M40 display during calibration.
Internal Memory:	Stores up to 150 bump test and calibration reports before overwrite. Reports contain serial number, time, date, sensor information, pass/fail, span values and bump values (for bump tests). Memory will retain information when power is off.

Note: Air monitor not included

REQUIRES ADDITIONAL CALIBRATION EQUIPMENT, PLEASE CONTACT CUSTOMER SERVICE FOR DETAILS

Note: Industrial Scientific products can only be sold in North America only.