Precision DC, mA, Voltage, Frequency Calibrator combined with True RMS Multimeter.

Features:

Calibrator:

• Simultaneous source/simulate and measure on large dual display
• Precision 0.03% accurate voltage and current calibration source
• Constant current output for loads up to 1200Ω
• Bipolar current (±25mA) and voltage (±1.5V, ±15V) outputs
• Simultaneously source 15V excitation voltage and measure mA output of 2-wire transmitters
• % of scale readout for 4 to 20mA or 0 to 20mA
• Wide range Frequency (square wave) source with adjustable amplitude, pulse width, and duty cycle
• Programmable 16 continuous or timed step outputs, or 999 step ramp
• Optional communications software allows you to remotely operate the CMM-17 from your PC and document readings

DMM:

• Measure DCmA, ACmA, DCV, ACV, AC+DC, Temperature, Frequency, Duty Cycle, Pulse Width, Resistance, Continuity, and Diode
• 1µV or 1µA resolution and 0.03% basic DCV accuracy (400mV-40V)
• 1ms Peak Hold for glitch capture, plus Data Hold, Auto Hold, relative and dynamic recording
• True RMS measurement for non-linear voltage and current loads

Common Features:

• Built-in bi-directional RS-232 interface
• Built-in NiMH rechargeable battery
• Large 50,000 count backlit LCD displays primary, secondary, source/measure ranges and functions selected
• Separate input/output banana jacks with fused protection
• Auto power off with disable function

Spec Summary:

Simultaneous Source/Measure:	Yes
Source
DC Voltage (resolution):	±1.5VDC, ±15VDC (0.1mV)
DC Current (resolution):	± 25mADC (1µA)
Square wave (resolution):	0.5 to 4800Hz (28 steps) (0.01Hz)
Basic DC Accuracy:	± 0.03%
Loop Power:	15VDC
Measure
DC Voltage:	1µV to 250V DC
DC Current:	1µA to 500mA DC
AC Voltage:	1µV to 250V AC
AC Current:	1µA to 500mA AC
Temperature:	-40 to 2502°F (-40 to 1372°C)
Pulse width:	0.1 to 1999.9msec
Frequency:	0.001Hz to 200kHz
Dimensions/Weight:	2.1" x 3.54" x 7.56" (54 x 90 x 192mm)/3.75lbs (1.71kg)
CE:	CE approved

If you cannot open the manual, Get Adobe Reader.