GasBadge Plus - Oxygen Single Gas Monitor ideal for personal protection from unsafe levels of oxygen
Features & Applications:
This GasBadge Plus single gas monitor provides a maintenance free solution for the detection of concentrations of oxygen, and features two-button operation for easy navigation and setup. The unit can be password-protected for added security. The large LCD display features a graphical interface and can be set up to show both gas type and direct gas readings, or just the gas type. The GasBadge Plus also features continuous event-logging, with the past 15 alarm events recorded.
The GasBadge Plus is lightweight and comes with a variety of clip attachments that allow you to wear it comfortably on your shirt or pants. It is designed with a durable rugged enclosure that is resistant to water and radio frequency interference. A protective, concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments.
Note: Sold in continental US only. Not Returnable Once Activated.
Features:
- Low-cost O2 monitoring
- 2-year continuous monitoring
- PPM or % by volume readout
- Powerful audible alarm complemented by vibrating and visual alarms, standard
- Backlit display
- “Go/No Go” display mode
- User adjustable alarm and calibration gas setpoints
- Confidence indicator
- Water resistant
- 2-year warranty
- Automatic self test and user-activated test
- Event-logging (last 15 gas alarm events)
- Cal Plus™ calibration station option
Spec Summary:
| Case: |
Rugged, water-resistant polycarbonate shell
with
protective concussion-proof overmold. RFI resistant. |
| Dimensions: |
3.2" x 1.9" x 1.1"
(81.3 mm x 48.3 mm x 27.9 mm) |
| Weight: |
2.5 oz. (72 grams) |
| Sensors: |
O2 |
| Measuring Ranges: |
O2 range: 0-30% by volume in 0.1% increments |
| Display: |
Custom LCD with graphical icons for easy
use
Segmented display for direct gas readings
Backlight for low light conditions
“Go/No Go” display mode
Peak reading indication |
| Alarms: |
User selectable low and high alarms
Ultra-bright LEDs, loud audible alarm (95 dB) and
vibrating alarm |
| Battery/Runtime: |
Lithium, non-replaceable
Maintenance-free operation for 2 years |
| Event-Logger: |
Continually on. Logs last 15 alarm events,
stamping
how long ago the event occurred, the duration of the
event, and the peak reading seen during the event.
Event-logger can be viewed on PC or printed directly from the instrument
to an infrared printer. |
Temperature
Range: |
-40 to 140ºF (-40 to 60ºC), typical |
| Humidity Range: |
0-99% RH (non-condensing), typical |
| IP Rating: |
Third-party certified IP66/67 (water resistant) |
| Approvals: |
UL and cUL: Class I, Div 1, Groups A,B,C,D;
T4
Class I, Zone 0, AEx ia IIC T4
CSA: Class I, Div 1, Groups A,B,C,D; T4
Ex ia IIC T4 (pending)
ATEX: Intrinsic Safety: EEx ia IIC T4
Equipment group and Category: II 2G
EMC: EN50270
Performance: O2, (EN45544) (pending)
Australia: Ex ia I/IIC T4 (pending)
IEC: Ex ia I/IIC T4 (pending)
Russia: GOST-R Approval (pending)
MSHA: Intrinsically safe for methane/air mixtures only (pending) |
Note: Industrial Scientific products can only be sold in North America only.
|
