Professional Equipment     Print Page
PO Box 5197
Janesville, WI 53547-5197

Phone Number: 608-743-8002
Fax Number: 608-743-8039
Toll Free Number: 1-800-334-9291
Toll Free Fax Number: 1-888-776-3187


GasBadge Plus Gas Monitor Cal Plus Calibration Station w/On-Board Dot Matrix Printer

 GasBadge Plus Gas Monitor Cal Plus Calibration Station w/On-Board Dot Matrix Printer
Item #: G511-0617
Manufacturer: Industrial Scientific Corporation
Manufacturer Item #: 18106344-1X+
Product Type: Calibration Station
Your Price: $1,282.95
The Cal Plus Calibration Station w/On-Board Dot Matrix Printer used with GasBadge Plus Single Gas Monitors!

Features & Applications:

Use this convenient, portable, cost-effective Cal Plus™ Calibration Station without the need for a PC to easily calibrate and bump test your GasBadge® Plus Monitor. This easy to use instrument lets you know if a test has passed or failed via the large LCD display and LED indicators, and also features a simple, two-button operation.

When connected to a PC via the USB connection, the Cal Plus™ Calibration Station software generates calibration and bump test reports that are automatically downloaded, and also downloads alarm events and instrument details to the PC for the easy configuration of preferences.

A built-in dot-matrix printer enables users to print calibration and bump test reports to provide permanent documentation of instrument serial numbers, pass/fail indications, bump test readings and full span readings for the GasBadge® Plus.

Note: Sold in continental US only.

Features:

  • Automatic bump test and calibration
  • Stand-alone operation – no PC is required
  • Two-button operation
  • LCD display
  • Multi-lingual support
  • LED indications
  • Serial printer interface
  • USB interface
  • Built-in printer
  • Internal memory
  • Custom PC software
  • User-adjustable calibration interval

Spec Summary:

Monitor Supported:
 GasBadge® Plus
Configurations:
 Single unit
Single unit with internal printer
Dimensions:
 3 x 14.55 x 7.6" single unit with printer
(7.6 x 37 x 19.3 cm)
Gas Inlets:
 One fresh air, one gas cylinder
Pump Flow Rate:
 0.25 LPM
Input:
 Universal power supply
Communication:
 On-board LEDs give status indication
(pass, fail). Multilingual LCD display shows
Cal Plus™ status and set-up menus. Realtime
readings on GasBadge® Plus display
during calibration.
Internal Memory:
 Stores up to 200 bump test and calibration
reports before overwrite. Reports
contain serial number, time, date, sensor
information, pass/fail, span values and
bump values (for bump tests). Memory will
retain information when power is off.

ADDITIONAL CALIBRATION EQUIPMENT NEEDED. PLEASE CONTACT CUSTOMER SERVICE FOR DETAILS.

Note: Industrial Scientific products can only be sold in North America only.
Close Window