Zircon StudSensor i60 OneStep finds the center of a stud with just one pass
Features & Applications:
StudSensor™ i60 finds wood and metal studs and joists up to 1-1/2 inches deep beneath the surface of walls, ceilings, and floors, in one simple step.
An integrated erasable marker makes it easy to mark the spot for anchoring without removing the tool from the wall.
The 9-light LED display indicates stud edges and center and deep targets, and
AC WireWarning® automatically detects hot AC wiring up to 3 inches deep.
When the StudSensor i60 finds the center of the stud, it beeps and the SpotLite® Pointing System shines a beam of light over the center.
Features:
- Zircon-exclusive CenterVision™ technology finds the center of studs in OneStep™
- Auto Depth Sensing automatically scans varying wall depths
- Auto Recalibration continuously recalibrates and points in the direction of the nearest stud
- Exclusive AC WireWarning™ continuously detects hot AC
- Integrated erasable marker for one-hand operation
- Exclusive SpotLite® Pointing System illuminates exact location of stud
- Finds both wood and metal studs
- A 9-light LED display indicates stud edges and center, deep targets and AC Wire Warning
- Uses a patented sensor to pinpoint the center and edges of wood or metal studs behind walls, floors, or ceilings
- Exclusive, patented SpotLite Pointing System shines a bright beam of light over target center
Applications:
- Hang heavy cabinets, pictures, mirrors, and shelves securely
- Install ceiling fans, grab bars, and chandeliers
- Install drapery rods and closet organizers
- Install outlets, dimmer switches, and cable lines
Spec Summary:
| Dimensions: |
6.21 in. H x 3.04 in. W x 1.35 in. D
(158 mm x 77 mm x 34 mm) |
| Weight : |
5.5 oz (156 g) with battery |
| Battery type: |
9-V (included) |
| Position accuracy: |
Stud Scan mode:
Up to 3⁄4 inch depth
Center: 1⁄8 inch typical
Edge: 3⁄16 inch typical
At 1 inch depth
Center: 1⁄4 inch typical
Center-finding capability: up to 1-1⁄2 inches deep typical |
| Depth: |
Stud: Typically up to 1-1⁄2 in. (38 mm)
NOTE: Sensing depth and edge detection can vary due to moisture
content of materials, wall texture, and paint. |
| AC Position accuracy: |
WireWarning™ mode: Typically 90–250 V at 50–60 Hz within 6 in.
(152 mm) of a hot unshielded wire |
| AC Depth: |
In typical drywall with Romex™ wiring, wire
can be detected up to 2 in. (50 mm) deep
NOTE: Sensing depth and edge detection can vary due to moisture
content of materials, wall texture, paint, etc. |
| Operating temperature: |
40° to 120°F (-4° to 49°C) |
| Storage temperature: |
-14° to 140°F (-26° to 60°C) |
| Humidity: |
80% RH (non-condensing) |
| Water resistance: |
Splash resistant, not waterproof |
|
