Zircon MultiScanner i700 OneStep doesn't look or work anything like your old stud finder!
Features & Applications:
It all starts with a floating scanner head featuring a bright backlit
LCD display. Press the Zircon MultiScanner i700 OneStep against the wall, and the floating head adjusts to your
hand angle to make it easy to keep contact with the wall.
Move it sideways across the wall, and when the i700 finds the center of a stud, it beeps and the SpotLite® shines. i700 locates wood and metal studs, finds nonferrous metal such as
copper up to 1-1/2 inches deep, and finds ferrous metal, such as rebar,
up to 3 inches deep.
AC Wirewarning® continuously detects hot AC for safety, and AC Trace helps map out subsurface location of hot electrical wiring.
Features:
- Zircon-exclusive CenterVision™ technology finds the center of studs in OneStep™
- Auto Depth Sensing automatically scans varying wall depths
- Auto Recalibration continuously recalibrates and points in the direction of the nearest stud
- Exclusive AC WireWarning™ continuously detects hot AC
- Integrated erasable marker for one-hand operation
- Unique floating head for improved accuracy
- Finds both wood and metal studs
- AC scanning to trace hot wires
- Metal scanning for finding pipes, nails, rebar, and other hidden metal
- Large easy-to-see backlit LCD screen
- Patented SpotLite® Pointing System
- Turn off wood and metal scan to look only for hot AC to find and trace wires, even in plastic conduit
- Uses a patented sensor to pinpoint the center and edges of wood or metal studs behind walls, floors, or ceilings
- Metal-only setting looks specifically for metal pipes or rebar
- Backlit LCD screen. Easy-to-understand, on-screen graphics
and audio signal indicate target
- Exclusive, patented SpotLite® Pointing System shines a bright beam of light over target center
Applications:
- Find the center and edges of wood or metal studs or joists to:
– Hang cabinets, pictures, mirrors, and shelves securely
– Install ceiling fans, grab bars, and chandeliers
- Find metal pipes behind tile and in concrete
- Find conduit, rebar, electrical boxes, exhaust vents, and ducting
- Trace hot wires behind walls, floors, and ceilings
Spec Summary:
| Dimensions: |
7.6 in. H x 3.6 in. W x 1.7 in. D
(193 mm x 91 mm x 43 mm) |
| Weight : |
7.4 oz (210 g) with battery
|
| Battery type: |
9-V (included) |
| Position accuracy: |
Stud Scan mode:
Up to 3⁄4 inch depth
Center: 1⁄8 inch typical
Edge: 3⁄16 inch typical
At 1 inch depth
Center: 1⁄4 inch typical
Center-finding capability: up to 1-1⁄2 inches typical
Metal Scan mode: Typically within 1⁄2 in. (13 mm) |
| Depth: |
Up to 1-1⁄2 in. (38 mm) in Stud Scan mode
Up to 1-1⁄2 in. (38 mm) for copper in Metal Scan mode
Up to 3 in. (76 mm) for rebar in Metal Scan mode
NOTE: Sensing depth and edge detection can vary due
to moisture content of materials, wall texture, and paint. |
| AC Position accuracy: |
In typical drywall with Romex™ wiring, wire
can be detected up to 3 in. (76 mm) deep |
| AC Depth: |
In typical drywall with Romex™ wiring, wire
can be detected up to 2 in. (50 mm) deep
NOTE: Sensing depth and edge detection can vary due to moisture
content of materials, wall texture, paint, etc. |
| Operating temperature: |
40 to 120°F (-4 to 49°C) |
| Storage temperature: |
-14 to 140°F (-26 to 60°C) |
| Humidity: |
80% RH (non-condensing) |
| Water resistance: |
Splash resistant, not waterproof |
|
