Get accurate voltage and frequency measurements with the Fluke 87V Industrial True RMS Multimeter
Features & Applications:
The Fluke 87V Industrial True RMS Multimeter is part of the 80 Series of electrical tools, and features improved measurement functions, better troubleshooting capabilities, and high resolution and accuracy. Utilized for energy auditing to solve more problems in electronics, plant automation, power distribution, and electro-mechanical equipment, the energy meter provides accuracy and diagnostic functions for maximum industrial productivity.
Features:
- Large display digits and 2 level bright white backlight for increased visibility
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition ANSI and IEC electrical safety standards
- Improved sleep mode for long battery life
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- True-rms ac voltage and current for accurate measurements on non linear signals
- Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Measure up to 1000 V ac and dc
- Measure up to 10 A (20 A for 30 seconds)
- 10,000 uF capacitance range
- Frequency to 200 kHz and % duty cycle
- Peak capture to record transients as fast as 250 μs
- 4½ digit mode
Applications:
- Motor Drives
- In Plant Automation
- Power Distribution
- Electro-mechanical equipment
Spec Summary:
| Specifications: |
| Voltage DC: |
Maximum Voltage:1000V
Accuracy: ±(0.05%+1)
Maximum Resolution:
10 µV
|
| Voltage AC: |
Maximum: 1000V
Accuracy: ±(0.7%+2) True RMS
AC Bandwidth: 20kHz*
*with low pass filter; 3db @ 1kHz
Maximum Resolution: 0.1 mV |
| Current DC: |
Maximum Amps: 10A (20 A for 30 seconds maximum)
Amps Accuracy: ±(0.2%+2)
Maximum resolution: 0.01 µA |
| Current AC: |
Maximum Amps: 10A (20 A for 30 seconds maximum)
Amps Accuracy: ±(1.0%+2) True RMS
Maximum Resolution: 0.1 µA |
| Resistance: |
Maximum Resistance: 50 MOhms
Accuracy: ±(0.2%+1)
Maximum Resolution: 0.1Ohms |
| Capacitance: |
Maximum Capacitance: 9,999 µF
Accuracy: ±(1%+2)
Maximum Resolution: 0.01 nF |
| Frequency: |
Maximum Frequency: 200 Khz
Accuracy: ±(0.005%+1)
Maximum Resolution: 0.01 Hz
|
| Duty Cycle: |
Maximum Duty Cycle: 99.9%
Accuracy: ±(0.2% per khz +0.1%)
Maximum Resolution: 0.1% |
| Temperature Measurement: |
-328.0°F - 1994.0°F
-200.0°C - 1090°C
excluding probe |
| 80 BK Temperature Probe: |
40.0°F - 500°F
-40.0°C - 260°C, 2.2°C or 2% whichever is greater |
| Conductance: |
Maximum Conductance: 60.00 nS
Accuracy: ±(1.0%+10)
Maximum Resolution: 0.01 nS |
| Diode: |
Range 3 V
Resolution: 1 mV
Accuracy: ± (2 % + 1) |
| Duty Cycle Range: |
Accuracy: Within ± (0.2% per kHz + 0.1 %) |
| Environmental Specifications: |
| Operating Temperature: |
-4 to 131°F (-20 to +55°C) |
| Storage Temperature: |
-40 to 140°F (-40 to +60°C) |
| Humidity (without Condensation): |
0 to 90% (32 to 95°F)
0 to 70% (95 to 131°F) |
| Operating Altitude: |
6,561 ft (2000 m) |
| Safety Specifications: |
| Overvoltage Category: |
EN 61010-1 to 1000 V CAT III, 600V CAT IV |
| Agency Approvals: |
UL, CSA, TÜV, VDE listed |
| Mechanical & General Specifications: |
| Size: |
7.91" x 3.85" x 2.04" (201 x 98 x 52 mm)
with holster |
| Weight: |
12.52 oz. (355 g) |
| Weight With Holster and Flex-Stand: |
1.37 lb. (624 g) |
| Display: |
Digital: 6000 counts updates 4/sec.
(Model 87 also has 19,999 counts in high-resolution mode)
Analog: 32 segments, updates 40/sec.
Frequency: 19,999 counts, updates 3/sec. at >10 Hz |
| Warranty: |
Lifetime |
| Battery Life: |
Alkaline: ~400 hours typical, without backlight |
| Shock: |
3.28 ft. (1 Meter) drop per IEC 61010-1:2001 |
| Vibration: |
Per MIL-PRF-28800 for a Class 2 instrument |
|
