Fluke T5-600 Voltage Continuity and Current Tester allows you to check AC/DC voltage, AC current, resistance and continuity
Features & Applications:
Fluke T5-600 Voltage Continuity and Current Tester stays connected to live lines much longer than solenoid-type testers, and is rugged enough to withstand a 10-foot drop. Designed to conform to IEC 1010-1 Category III standards. OpenJaw™ feature lets you check current up to 100 amps without breaking the circuit. Displays resistance to 1000 ohms. Detachable Slim-Reach™ test probes, designed to fit in wall sockets and tight spots, stow neatly in the back of the tester. Auto-off mode conserves battery life. Comes complete with (2) AA batteries, test leads with detachable probe tips, and instruction sheet.
Features:
- Automatically measures volts ac and volts dc with precise digital resolution
- Displays resistance to 1000 Ohms
- Easy and accurate OpenJaw™ current measurement
- Continuity beeper
- Compact design with neat probe storage
- Rugged enough to withstand a 10-foot (3m) drop
- Detachable SlimReach™ probe tips are customized for national electrical standards
- Test leads accept Fluke accessory test clips
- Can stay connected much longer than solenoid type tester
- Auto off mode to conserve battery life
Spec Summary:
| Specifications |
Continuity beeper: |
Threshold: On at <25 Ohms, off at >400 Ohms |
Volts indicator LED: |
Threshold: Guaranteed on by 30V ac |
| Environmental Specifications |
Operating temperature: |
14 to 122°F (-10 to 50°C) |
Storage temperature: |
-22 to 140°F (-30 to 60°C) |
Humidity (Without Condensation): |
0 to 95% 41 to 86°F (5 to 30°C)
0 to 75% 86 to 104°F (30 to 40°C)
0 to 45% 104 to 122°F (40 to 0°C) |
Dust/water resistance: |
Yes |
Operating Altitude: |
6,561.6 ft (2000 meters) max |
Temperature Coefficient |
0.1 x (specified accuracy)/degree F
<64.4°F or >82.4°F
(<18°C or >28°C) |
| Safety Specifications |
Overvoltage category: |
600V ac/dc, CAT III |
Agency Approvals: |
UL, CSA, and VDE |
Maximum voltage: |
Between any terminal and earth ground |
| Mechanical & General Specifications |
Size: |
1.2" x 2.0" x 8.0" (30.5 x 51 x 203 mm) |
Weight: |
10.58 oz (300g) |
Warranty: |
2 years |
Battery life: |
200 hour zinc chloride, 400 hour alkaline |
Battery type: |
Two AA zinc chloride |
Low battery indicator: |
Yes |
Current sensor opening: |
0.5 in (12.9 mm ) |
Calibration cycle: |
1 year |
Test leads: |
Type: Heavy duty, flexible leads rated for 1000V use.
Field replaceable leads terminate in male shrouded
banana plugs
Probes: One red, one black, of two tip.
Detachable Slim-ReachT probe tips in one
Styles: TP4 4 mm round |
|
|
