Amprobe 5XP-A Digital Multimeter with Voltage Detection for residential and commercial electrical use
Features & Applications:
The Amprobe 5XP-A Digital Multimeter combines features and accuracy in a small device. Each 5XP-A Multimeter has built-in non-contact voltage (NCV) detection, Magne-Grip holster and CAT III safety ratings.
Features:
- 27 ranges/10 functions – a complete performance, general purpose digital multimeter
- VolTect™ Non-Contact Voltage Detector lets you instantly identify dangerous AC voltage
- Magne-Grip™ holster with magnetic strap frees both hands for work
- 2000-count 3-1/2 digit display
- 750 V ac/ 1000 V dc – highest voltage rating in this class of meter
- Resistance and continuity for troubleshooting bad connections
- Battery load test with 1.5 volt and 9 volt capabilities
- Min/Max records minimum and maximum values
- Data Hold freezes display to “hold” measurement reading
Spec Summary:
| Specifications |
DC Current: |
| Ranges |
200 µA, 2 mA, 20 mA, 200 mA |
| Resolution |
0.1 µA |
| Accuracy |
± (1.5 % rdg + 1 dgt) |
| Input protection |
315 mA/1000 V fast blow ceramic fuse 6.3 x 32 mm on mA input |
| Burden voltage |
300 mV max. (1 V max. on 200 mA range) |
|
AC Current (45 Hz - 500 Hz): |
| Ranges |
200 µA, 2 mA, 20 mA, 200 mA |
| Resolution |
0.1 µA |
| Accuracy |
± (2.0 % rdg + 5 dgts) |
| Input protection |
315 mA/1000 V fast blow ceramic fuse 6.3 x 32 mm on mA input |
| Burden voltage |
300 mV max. (1 V max. on 200 mA range) |
|
Resistance: |
| Ranges |
200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 2 MΩ, 20 MΩ |
| Resolution |
100 mΩ |
| Accuracy on 200 Ω to 200 kΩ ranges |
± (1.0 % rdg + 4 dgts) |
| Accuracy on 2 MΩ ranges |
± (1.5 % rdg + 4 dgts) |
| Accuracy on 20 MΩ range |
± (2.0 % rdg + 5 dgts) |
| Open circuit volts |
0.3 Vdc typical, (3.0 Vdc on 200 Ω range) |
| Overload protection |
1000 VDC or 750 VAC rms |
|
Continuity: |
| Audible indication |
75 Ω ± 25 Ω |
| Response time |
100 ms |
| Overload protection |
1000 VDC or 750 VAC rms |
|
Diode Test: |
| Test current |
1.0 mA (approximate) |
| Accuracy |
± (1.5 % rdg + 3 dgts) |
| Resolution |
1 mV |
| Open circuit volts |
3.0 Vdc typical |
| Overload protection |
1000 VDC or 750 VAC rms |
|
Battery Test: |
| Ranges |
1.5 V, 9 V |
| Resolution |
1 mV, 10 mV |
| Accuracy |
± (3.5 % rdg + 2 dgts) |
| Loaded current |
150 mA typical for 1.5 V range, 5 mA typical for 9 V range |
| Overload protection |
1000 VDC or 750 VAC rms on 9 V range, on VΩ input315 mA/1000 V fast blow ceramic fuse on 1.5 V range, on mA input |
| Non-Contact Voltage Indicator |
Sense voltage 70 V to 600 VAC beeper chirps and big bright red LED comes on, works on all ranges |
|
| General Specifications |
Display: |
|
3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999 |
|
Polarity: |
|
Automatic, positive implied, negative polarity indication |
|
Overrange: |
|
(OL) or (-OL) is displayed |
|
Zero: |
|
Low battery indication: |
|
The battery icon is displayed when the battery voltage drops below theoperating level |
|
Measurement rate: |
|
2.5 times per second, nominal |
|
Operating environment: |
|
0 °C to 50 °C at <70 % R.H. |
|
Storage temperature: |
|
-20 °C to 60 °C, 0 to 80 % R.H. with battery removed from meter |
|
Accuracy: |
|
Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity |
|
Temperature coefficient: |
|
0.1 x (specified accuracy) per °C (0 °C to 18 °C, 28 °C to 50 °C) |
|
Altitude: |
|
Power: |
|
Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22 |
|
Battery life: |
|
200 hours typical with carbon-zinc |
|
Dimensions: |
|
155 mm (H) x 72 mm (W) x 32 mm (D) |
|
Weight: |
|
Approx. 210 g including battery |
|
Safety: |
|
Designed to meet IEC 1010-1, Rev-2 CAT I 1000 V, CAT II 600 V,CAT III 300 V, class 2 and pollution deg. 2 indoor use. Complies with CE,and CSA 22.2 No. 1010-1 requirements. |
|
Auxiliary Features: |
|
Min/Max Records the maximum reading in a measurement, records the minimum reading in a measurementData hold Freeze the latest reading on the displaymA jack Input warning detects wrong connection |
|
|
