This AC Low Voltage Detector from Fluke couldn't be easier to use!
Features & Applications:
For highly accurate voltage readings, simply touch the tip to a control wire, conductor, or outlet. When it glows red, you know there is voltage in the line. Detects without metallic contact.
Electricians, maintenance service, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home with this pocket sized tester.
Features:
- Voltbeat™ technology and continuous self-test - so you always know it's working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 V for added protection
- 20 V to 90 V AC control circuit model also available
- Two-year warranty
Spec Summary:
| Operating principle: |
Senses the steady state electrostatic field produced by ac voltage
through insulation without requiring contact to the bare conductor.
A red glow at the tip and a beeping noise (if not switched OFF)
indicates the presence of voltage. |
| Voltage sensing ranges: |
20 V to 90 V |
| Detector tip style: |
Blade or round, depending on model |
| Light source: |
One high intensity red LED |
| Agency Approvals: |
c CSA us, CE, TUV, C-Tick |
| Safety Rating: |
1000 V CAT IV |
| IP Rating : |
IP 40 |
| Operating temperature: |
14 to 122°F (-10 to 50°C) |
| Operating humidity ranges: |
0 to 95% (32 to 86°F) [0 to 30°C]
0 to 75% (86 to 104°F) [30 to 40°C]
0 to 45% (104 to 131°F) [40 to 55°C] |
| Operating Altitude: |
9 842.5 ft (3,000 m) |
| Batteries: |
2 AAA alkaline batteries included |
|
