The GE Druck DPI 800DP Precision Dual Sensor Pressure Indicator delivers results you can rely on
A lead time of 4 weeks is required for this product. Please contact our tech department at 1-800-334-9291 to select your range before you order!
Features & Applications:
The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.
DPI 800DP Pressure Indicator is the ideal pressure measurement tool. Pressure ranges from 25 mbar to 700 bar including vacuum options. All-inclusive accuracy can be relied on from one year to the next, even in tough environmental conditions.
Pressure Range |
G/D |
G |
A |
Media |
Over-pressure |
*Accuracy
Std
|
%FS
High |
| ±1, 3, 5 psi |
• |
|
|
2 |
3 |
2 x FS |
0.075 |
|
| 5 psi |
|
|
• |
2 |
|
2 x FS |
0.075 |
|
| ±10 psi |
• |
|
|
2 |
3 |
2 x FS |
0.05 |
0.01 |
| -15 to 15, -15 to 30 psi |
• |
|
|
2 |
3 |
2 x FS |
0.05 |
0.01 |
| 30 psi |
|
|
• |
2 |
|
2 x FS |
0.05 |
|
| -15 to 50, 100, 150 psi |
|
• |
|
1 |
|
2 x FS |
0.05 |
0.01 |
| 100 psi |
|
|
• |
1 |
|
2 x FS |
0.05 |
0.01 |
| 300 psi |
|
|
• |
1 |
|
2 x FS |
0.05 |
0.01 |
| 300,500,1000,1500,2000,3000 |
|
|
• |
|
|
2 x FS |
0.05 |
0.01 |
G/D suitable for gauge/differential use (max line pressure 2 bar calibrated referenced to
atmosphere). 1) Stainless steel 2) Non-corrosive gas/fluid. 3) Non-corrosive gas.
*Standard Accuracy: Total accuracy 32° to 122°F and 1 year stability
*High Accuracy (DPI 800P/802P): Accuracy 64° to 82°F. Stability
0.01% rdg/year.
Single or dual range: One or two internal sensors can be selected
from the table above. Note for dual range instruments, G/D ranges will
be configured as G (gauge), ranges 5 psi and below not available and
only one sensor 1500 psi or above.
Features:
- Dual Sensor Configuration -
Extended measurement range and simultaneous two
channel reading (P1 and P2 or P1 - P2)
- Premier Accuracy
- Precision over 65 to 82°F (18 to 28°C)
- For operation over 41°F to 113 (5 to 45°C):
- 0.014% FS for ranges above 10 psi (700 mbar)
- 0.075% FS for ranges below 15 psi (1 bar)
- Stability over a year:
- 0.01% reading ranges above 5 psi (350 mbar)
- 0.03% reading ranges below 10 psi (700 mbar)
- Calibration uncertainty: 50 ppm of reading
- Pressure ranges from 10 in H2O to 10,000 psi
(25 mbar to 700 bar) including
vacuum options
- Single or dual range configuration
- Pressure test and maintenance
- Transmitter calibration
- Loop set-up and diagnostics
- Switch verification
Applications:
- Pressure test and maintenance
- Transmitter calibration
- Loop set-up and diagnostics
- Switch verification
Spec Summary:
Standard Accuracy: |
Total accuracy over 32 to 122°F (0 to 50°C),
including one year stability and calibration uncertainty
|
Languages: |
Chinese, English, French, German, Italian,
Japanese, Portuguese, Russian, Spanish |
Operating Temperature: |
14 to 122°F |
Humidity: |
0 to 90% non-condensing (Def Stan 66-31,
8.6 cat III) |
Ingress Protection: |
IP55 dust and splashing water |
Shock and Vibration: |
EN61010:2001, Def Stan 66-31, 8.4 cat III |
EMC: |
EN61326-1:1997 + A1:1998 |
Safety: |
Electrical EN61010:2001. Pressure directive,
class SEP. CE marked |
Display: |
Graphic 2 x 2 inches LCD with backlight.
99999 resolution |
Size and Weight: |
7 x 3-1/2 inches, 1.1 lbs. |
Batteries: |
3 x AA alkaline. > 50 hours measure.
>10 hrs 24V source |
|
