Clip the RKI GasWatch GW2X to your hard had for the ultimate in hands-free Oxygen monitoring!
Features & Applications:
The RKI GasWatch GW2X Hands Free Oxygen Monitor can be worn on your wrist just as if it were a watch-and it does in fact tell time! This convenient tool is affordable and reliably monitors the surrounding area for oxygen deficiency. The Hands Free Oxygen Monitor utilizes an advanced microprocessor and features distinctive audible and visual alarms alerting you to dangerous gas conditions and malfunctions.
The unit also features a large, backlit digital readout that automatically lights in an alarm condition, and displays PEAK, TWA, and STEL readings. The replacement sensors are inexpensive, easily field replaceable and have a life expectancy of about 2 years. The unit comes equipped with hard hat clip and will operate for over 3000 hours on one battery (about 1 year normal use).
Features:
- Hands free gas monitoring
- Compact "watch type" design
- Vibration, visual and audible alarms standard
- Over 3,000 hours of operation from 1 battery
- Fast, accurate response with digital LCD display
- Hard hat clip
- Manual backlight (Automatic light during alarm)
- Sensor fail alarm
- PEAK hold function (Max. value during operation)
- TWA and STEL function
- Displays current time
- 2 Year warranty
Applications:
- Worker Safety
- Chemical Plants
- Hazardous Waste Sites
- Mines
- Tunnels
- Sewage Treatment Plants
Spec Summary:
| Measuring Gas: |
Oxygen (O2) |
| Detection Principle: |
Galvanic cell |
| Sensor Type: |
OS-BM2 |
Measuring Range
(Increments): |
0 - 40.0% vol.
(0.1% vol.) |
Alarm Points
(Factory Set): |
Low - 19.5% vol.
High - 23.5% vol.
Over - 40.0% vol. |
| Alarm Types: |
Gas alarm: 2 step alarm, STEL, TWA, Over alarm
Trouble alarm: sensor connection, low battery, circuit error
Calibration range over alarm |
| Alarm Indication: |
Gas alarm: flashing light, intermittent buzzer and pulsing vibration
Trouble alarm: flashing light, intermittent buzzer and trouble type
displayed |
| Sampling Method: |
Diffusion |
| Response Time: |
T90 in 20 seconds |
| Accuracy: |
+/- 0.5% |
| Power Source: |
One coin type lithium battery (CR 2450) |
| Continuous Operation: |
Approximately 3,000 hours with no alarms or backlighting
(about 1 year of normal use) |
| Safety Rating: |
CSA classified, “C/US”, as intrinsically safe. Class I, Division 1,
Groups A, B, C and D. Class I, Zone 0, Group IIC. Temperature
code T4. |
| Display Method: |
Digital LCD with auto back light |
| Dimensions Weight: |
2.5"(w) x 1.7"(h) x 0.9"(d) / 63.5 mm(w) x 43 mm(h) x 23 mm(d)
2 ounces / 60 grams |
| Operating Temp & Humidity: |
-4 ~ 104°F (-20 ~ 40°C), below 85% RH (non-condensing) |
| Dimensions & Weight: |
71.(w) x 84(h) x 29.5(d) mm, 135 g
2.81”(w) x 3.31”(h) x 1.16”(d), 4.76 oz |
| Features: |
LCD manual back light (automatic lighting during alarm)
STEL, TWA function
Peak hold
Time indication |
| Attachment: |
Hard hat clip |
| Warranty: |
2 years material & workmanship |
* Specifications subject to change without notice
|
