Clip the RKI GasWatch GW2X to your belt for convenient hands-free Oxygen monitoring!
Features & Applications:
RKI GasWatch GX2X Hands Free Oxygen Monitor can be comfortably worn on the wrist like a watch and also comes with a belt clip to keep it easily accessible on your belt. This inexpensive gas monitor features a built in vibrator, audible, and visual alarms, a large digital readout with a manual backlight, and the display of PEAK, TWA, and STEL readings. Replacement sensors are inexpensive and easily field replaceable. View the full list of features below.
Features:
- Hands free gas monitoring
- Compact "watch type" design
- Vibration, visual and audible alarms standard
- Over 3,000 hours of operation from 1 battery
- Fast, accurate response with digital LCD display
- Belt clip
- Manual backlight (Automatic light during alarm)
- Sensor fail alarm
- PEAK hold function (Max. value during operation)
- TWA and STEL function
- Displays current time
- 2 Year warranty
Applications:
- Worker Safety
- Chemical Plants
- Hazardous Waste Sites
- Mines
- Tunnels
- Sewage Treatment Plants
Spec Summary:
Measuring Gas: |
Oxygen (O2) |
Detection Principle: |
Galvanic cell |
Sensor Type: |
OS-BM2 |
Measuring Range
(Increments): |
0 - 40.0% vol.
(0.1% vol.) |
Alarm Points
(Factory Set): |
Low - 19.5% vol.
High - 23.5% vol.
Over - 40.0% vol. |
Alarm Types: |
Gas alarm: 2 step alarm, STEL, TWA, Over alarm
Trouble alarm: sensor connection, low battery, circuit error
Calibration range over alarm |
Alarm Indication: |
Gas alarm: flashing light, intermittent buzzer and pulsing vibration
Trouble alarm: flashing light, intermittent buzzer and trouble type
displayed |
Sampling Method: |
Diffusion |
Response Time: |
T90 in 20 seconds |
Accuracy: |
+/- 0.5% |
Power Source: |
One coin type lithium battery (CR 2450) |
Continuous Operation: |
Approximately 3,000 hours with no alarms or backlighting
(about 1 year of normal use) |
Safety Rating: |
CSA classified, “C/US”, as intrinsically safe. Class I, Division 1,
Groups A, B, C and D. Class I, Zone 0, Group IIC. Temperature
code T4. |
Display Method: |
Digital LCD with auto back light |
Dimensions Weight: |
2.5"(w) x 1.7"(h) x 0.9"(d) / 63.5 mm(w) x 43 mm(h) x 23 mm(d)
2 ounces / 60 grams |
Operating Temp & Humidity: |
-4 ~ 104°F (-20 ~ 40°C), below 85% RH (non-condensing) |
Dimensions & Weight: |
71.(w) x 84(h) x 29.5(d) mm, 135 g
2.81”(w) x 3.31”(h) x 1.16”(d), 4.76 oz |
Features: |
LCD manual back light (automatic lighting during alarm)
STEL, TWA function
Peak hold
Time indication |
Attachment: |
Belt clip |
Warranty: |
2 years material & workmanship |
* Specifications subject to change without notice
|
