In addition to offering dependable refrigerant identification, the ID Plus measures noncondensable gases (air) in the refrigerant and purges them directly from the tank or system. It's quick and accurate, too! In less than a minute, it displays test results and passes the refrigerant only if it's 98% pure. Onboard printer port allows you to connect a printer for hard copy of testing results. Contoured case can be held in either hand, and rubber feet protect what the unit is resting on.

Features:

• Displays the actual percentage of R-12, R-134a, R-22 and air in the system or tank.
• Gives you the option of purging air if a significant concentration is found.
• Hydrocarbon alarm sounds if flammable substances are sensed.
• On-board printer port allows you to connect a printer for hard copy of testing results.
• Gauge on panel shows system pressure.
• Fast and Accurate - Displays test results in less than a minute and passes the refrigerant only if it's 98% pure. To assure consistent, rapid results, the units are not pressure/temperature dependent.
• Reliable Technology - The instruments use dependable infrared technology developed by Neutronics, Inc., to determine if the refrigerant is an acceptable type and is pure enough to be used.
• Unique Case Design - Puts all the components up front where you can see them at a glance, including the filter. Contoured case can be held in either hand and rubber feet protect the vehicle's finish.

Spec Summary: